Good clean and new steering wheel
04 August 2013, 05:04 PM
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Dec 2009
Location: essex (Tiptree)
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Good clean and new steering wheel
gave the car a good clean today and recently fitted new omp wheel. Just received walbro fuel pump and rcm decat pipe on its way.
Then to get a remap, what power does the tdo5 roughly make on Hayward and scott exhaust, decat, k&n panel filter and walbro fuel pump?
Then to get a remap, what power does the tdo5 roughly make on Hayward and scott exhaust, decat, k&n panel filter and walbro fuel pump?
04 August 2013, 05:49 PM
#4
Very nice 
You'd be foolish to expect or attempt much beyond 300 on the 380 injectors and standard top mount
Sort the injectors, fit an ARC TMIC or FMIC, install a later map sensor and you can chase 320-340 depending on the engines propensity to det at higher boost and greater advance
You'd be foolish to expect or attempt much beyond 300 on the 380 injectors and standard top mount
Sort the injectors, fit an ARC TMIC or FMIC, install a later map sensor and you can chase 320-340 depending on the engines propensity to det at higher boost and greater advance
04 August 2013, 07:45 PM
#5
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Dec 2009
Location: essex (Tiptree)
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
But will it be alright to run on the standard injectors and standard top mount? I'm not after huge power just want it running as best as it can and a bit quicker then what it is.
04 August 2013, 07:52 PM
#6
Yes just don't be greedy You won't get huge power but you will get a nice drive Your mapper will extract all he can with a margin of headroom I'm sure More than 300 and you risk the box with the associated boost to get you there. Bear in mind without a later map sensor you are restricted to 1.1 bar by the time you've accounted for a little overboost
Who you using/ ECU ?
You're not far from me if you ever need a second opinion or advice
This is my car
https://www.scoobynet.com/members-ga...stunner-d.html
You won't get huge power but you will get a nice drive Your mapper will extract all he can with a margin of headroom I'm sure More than 300 and you risk the box with the associated boost to get you there. Bear in mind without a later map sensor you are restricted to 1.1 bar by the time you've accounted for a little overboost Who you using/ ECU ?
You're not far from me if you ever need a second opinion or advice
This is my car
https://www.scoobynet.com/members-ga...stunner-d.html
Last edited by 53; 04 August 2013 at 07:54 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM