Back on the road
#1
Back on the road
Hi guys
On Saturday we are been for our wagon and finally we are back on the road
Here are spec of the our wagon,which should be mapped in next two weeks on full power
Engine:
2.35L SBR JDM WRX with AVCS built by Neil@Slowboy Racing:
EJ22T Stroke'd to 2.35L painted black
RCM Wiseco Pistons
Carrillo Pro A Beam Rods
ACL Race Bearing sets:big end and main bearing set
KillerB baffled sump
Twinscroll Sump
OEM 11mm Oil pump and water pump
14mm Headstuds
Cosworth Stopper HG
79mm Subaru V8(EJ257) Nitrided Crankshaft
Gates Kevlar timing belt kit
OEM Subaru gasket set
Heads:
JDM Spec C Big port heads
Kelford V2-199-C
Kelford KVS109-STI springs
Supertech SIVN-1010 36.00mm(Std Size)
Supertech SEVN-1010 32.00mm(Std Size)
Painted black
Engine Dress Up:
Powder coated Header tank
Powder coated Alternator
Cobb Billet Oil Cap
OEM Header Tank Cap
Lightweight pulley set
Alloy Radiator
Oil system:
Setrab/Mocal Oil cooler
KillerB Baffled sump plate
Twin scroll Sump
Baffled 3-port Oil Catch Can
Induction/Turbo and Fuel system:
ID1000cc injectors with Fuel Lab FPR and Fuel Lab Billet Fuel Filter
Fuel Swirl/surge pot fitted in boot with Sytec Fuel filter and 044 fuel pump including the teflon fuel lines and AN fittings
Modified WRX CDF Parallel Fuel Rails
Braided Fuel lines with AN fittings
340LPH HRC Fuel Pump
Spec C Inlet manifold custom powder coated(black)
H&S Rotated/Twisted Kit
Lateral Performance GT3582R
Turbosmart 44mm External Wastegate
RCM 260mm Tall Filter
RCM 100mm Spun Aluminium Induction Trumpet
HKS Hi-Power Exhaust
3port Prodrive boost solenoid
NOS Sniper wet system(25-50bhp jet) with 10lb NOS bottle and connected and controlled by Syvecs
AEM Water Methanol kit
Hybrid(HDI) FMIC
ECU
Syvecs S6 PnP ECU with 8 switchable maps ALS and LC enabled with NTK L2H2 (LZA-09-E1) Wideband fitted with JTi sensor pack
Transmission:
5speed PPG(1st-4th straight cut,steel selector forks,5th std)
Front and rear UK Differential 3.90
Exedy Twin Plate with Exedy lightweight flywheel
Suspension mods:
HSD HR Coilovers FR 8kg/mm and 6kg/mm
Front Solid CDF Droplinks
Eibach ARB FR 22mm & RR 24mm
Hardrace Adjustable Lateral Links with ball jointed rear drop links
Whiteline Anti Lift Kit
Cusco Front and Rear Strut brace
4 point underbrace(STi pink)
WhiteLine Roll Centre Adjustment Kit KCA313
Fast road setup by Dixon@ DMS Dixon Motorsport
Brakes:
FR K-sport 8pots 356mm with Performance Friction Z-Rated pads
RR K-Sport 6pots 330mm with Ferodo DS2500
Performance Friction RH665
HEL braided lines
Wheels:
Toyo R888 255/40 ZR17
Drag DR-31 9JX18" ET20
Interior:
Full late V8 dashboard(fully flocked ) with Late V8 HVAC
Race Technology Dash2 with Syvecs CAN ECU interface (currently showing all parameters from Syvecs CANbus like Oil pressure,Oil Temp,EGT,Boost AFR,NOS etc.)
JT Innovations Toucan with sensors pack(Fuel pressure,Oil pressure,Oil temp,ACT) connected via CANbus to the Syvecs S6 PnP
ATi ePod Steering Column Gauge pod with Shadow Boost Gauge and AutoMeter Fuel Level Gauge
AutoMeter NOS gauge fitted
Sparco EVO Grp N 2012 model
Sparco EVO Grp N 2012 model
2x Buddy Club Rails
STi door cards
STi Alloy pedals
Sparco gearknob
STi Short shifter
2x TRS 4 Point Harness
Harness bar
Momo Drift steering wheel 330mm
Life-Line Mechanical 2.25Kg Extinguisher Kit
Exterior mods:
Chargespeed Front bumper with Chargespeed Carbon Ducts
Custom Diffuser
STi fenders
JDL rear lip
Chargespeed Sideskirts
OE Bonnet with STi scoop
JDM HID lights
JDM Grill
Hella Supertone Horns
With this I would like to thanks to Neil@Slowboy racing for great build and lots of support,Simon@JGM for mapping our wagon,Adam@No Limit Motorsport for helping us with the parts,John@johnybon,Matty@Mattybr5 for helping us with sourcing the parts,TimH@JTi,Ryan@prodriverules,Rich@Maggs and plus many others who help us with the project
With this I would like to say to everyone Thanks
And one HDR
Thanks,Jura
On Saturday we are been for our wagon and finally we are back on the road
Here are spec of the our wagon,which should be mapped in next two weeks on full power
Engine:
2.35L SBR JDM WRX with AVCS built by Neil@Slowboy Racing:
EJ22T Stroke'd to 2.35L painted black
RCM Wiseco Pistons
Carrillo Pro A Beam Rods
ACL Race Bearing sets:big end and main bearing set
KillerB baffled sump
Twinscroll Sump
OEM 11mm Oil pump and water pump
14mm Headstuds
Cosworth Stopper HG
79mm Subaru V8(EJ257) Nitrided Crankshaft
Gates Kevlar timing belt kit
OEM Subaru gasket set
Heads:
JDM Spec C Big port heads
Kelford V2-199-C
Kelford KVS109-STI springs
Supertech SIVN-1010 36.00mm(Std Size)
Supertech SEVN-1010 32.00mm(Std Size)
Painted black
Engine Dress Up:
Powder coated Header tank
Powder coated Alternator
Cobb Billet Oil Cap
OEM Header Tank Cap
Lightweight pulley set
Alloy Radiator
Oil system:
Setrab/Mocal Oil cooler
KillerB Baffled sump plate
Twin scroll Sump
Baffled 3-port Oil Catch Can
Induction/Turbo and Fuel system:
ID1000cc injectors with Fuel Lab FPR and Fuel Lab Billet Fuel Filter
Fuel Swirl/surge pot fitted in boot with Sytec Fuel filter and 044 fuel pump including the teflon fuel lines and AN fittings
Modified WRX CDF Parallel Fuel Rails
Braided Fuel lines with AN fittings
340LPH HRC Fuel Pump
Spec C Inlet manifold custom powder coated(black)
H&S Rotated/Twisted Kit
Lateral Performance GT3582R
Turbosmart 44mm External Wastegate
RCM 260mm Tall Filter
RCM 100mm Spun Aluminium Induction Trumpet
HKS Hi-Power Exhaust
3port Prodrive boost solenoid
NOS Sniper wet system(25-50bhp jet) with 10lb NOS bottle and connected and controlled by Syvecs
AEM Water Methanol kit
Hybrid(HDI) FMIC
ECU
Syvecs S6 PnP ECU with 8 switchable maps ALS and LC enabled with NTK L2H2 (LZA-09-E1) Wideband fitted with JTi sensor pack
Transmission:
5speed PPG(1st-4th straight cut,steel selector forks,5th std)
Front and rear UK Differential 3.90
Exedy Twin Plate with Exedy lightweight flywheel
Suspension mods:
HSD HR Coilovers FR 8kg/mm and 6kg/mm
Front Solid CDF Droplinks
Eibach ARB FR 22mm & RR 24mm
Hardrace Adjustable Lateral Links with ball jointed rear drop links
Whiteline Anti Lift Kit
Cusco Front and Rear Strut brace
4 point underbrace(STi pink)
WhiteLine Roll Centre Adjustment Kit KCA313
Fast road setup by Dixon@ DMS Dixon Motorsport
Brakes:
FR K-sport 8pots 356mm with Performance Friction Z-Rated pads
RR K-Sport 6pots 330mm with Ferodo DS2500
Performance Friction RH665
HEL braided lines
Wheels:
Toyo R888 255/40 ZR17
Drag DR-31 9JX18" ET20
Interior:
Full late V8 dashboard(fully flocked ) with Late V8 HVAC
Race Technology Dash2 with Syvecs CAN ECU interface (currently showing all parameters from Syvecs CANbus like Oil pressure,Oil Temp,EGT,Boost AFR,NOS etc.)
JT Innovations Toucan with sensors pack(Fuel pressure,Oil pressure,Oil temp,ACT) connected via CANbus to the Syvecs S6 PnP
ATi ePod Steering Column Gauge pod with Shadow Boost Gauge and AutoMeter Fuel Level Gauge
AutoMeter NOS gauge fitted
Sparco EVO Grp N 2012 model
Sparco EVO Grp N 2012 model
2x Buddy Club Rails
STi door cards
STi Alloy pedals
Sparco gearknob
STi Short shifter
2x TRS 4 Point Harness
Harness bar
Momo Drift steering wheel 330mm
Life-Line Mechanical 2.25Kg Extinguisher Kit
Exterior mods:
Chargespeed Front bumper with Chargespeed Carbon Ducts
Custom Diffuser
STi fenders
JDL rear lip
Chargespeed Sideskirts
OE Bonnet with STi scoop
JDM HID lights
JDM Grill
Hella Supertone Horns
With this I would like to thanks to Neil@Slowboy racing for great build and lots of support,Simon@JGM for mapping our wagon,Adam@No Limit Motorsport for helping us with the parts,John@johnybon,Matty@Mattybr5 for helping us with sourcing the parts,TimH@JTi,Ryan@prodriverules,Rich@Maggs and plus many others who help us with the project
With this I would like to say to everyone Thanks
And one HDR
Thanks,Jura
Trending Topics
#11
Thanks guys for kind comments,really appreciated
Maggs we will come probably sometimes this week and thanks
Jay thanks again
Gaz thanks
Scooby noob,white wheels are sold and thanks there
Ace thanks,this project again has been longer than we expected
big joe thanks,not sure,how much will make,but we hopping for 600bhp,which should make
Tidgy thanks and about the rotating inlet manifold,yes we are think about this before,but has been so late and this will means lots of work again involved,we will leave like is it for now
Banny thanks
Again thanks guys for kind comments and really appreciated for yours comments
Jura
Maggs we will come probably sometimes this week and thanks
Jay thanks again
Gaz thanks
Scooby noob,white wheels are sold and thanks there
Ace thanks,this project again has been longer than we expected
big joe thanks,not sure,how much will make,but we hopping for 600bhp,which should make
Tidgy thanks and about the rotating inlet manifold,yes we are think about this before,but has been so late and this will means lots of work again involved,we will leave like is it for now
Banny thanks
Again thanks guys for kind comments and really appreciated for yours comments
Jura
#30
Scooby Senior
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
http://subaru-impreza-body-kits.co.u...g.html?sno=298