My Impreza Turbo
#1
Guest
Posts: n/a
My Impreza Turbo
Well figured i should make a proper thread for this badboy lol
Picked it up yesterday an havent stopped smiling
R reg Impreza Turbo 2000
Specs
Exterior
tinted windows
Angel eyes - Swapping them for standard crystal lights
JUN splitter - To be fitted
Crystal indicators
Crystal side repeater
HID kit - To be fitted will do that when i get the crystals i think
Interior
Blitz dtt turbo timer/lap timer/ everything timer lol
2x Auto gauges in a pillar pod - Oil pressure/ boost
STI interior
Sony cd player
2x12" subs an amp - to be fitted
Engine
EJ20 turbo
HKS SSQ blow off valve
HSK mushroom filter
Boost up to 1 bar
remapped by Andy Forrest
Magnex oval full system 2.5"
GREDDY clutch
Wheels/Suspension/Brakes
17" speedline chronos in what looks like cheap cheap tyres
lowered on tein springs 35mm
EBC drilled/grooved discs an pads
I think thats it i may of missed bits
Im going to clean the engine bay this weekend as its a bit dirty.
Plans
Crystal headlights
Chrome for the engine bay
Poly bush it
strut brace
some go fast bits
Paint the calipers on Friday
I love it
I'm tempted to quit my job an drive it all the time BUT i wouldnt be able to fuel it LOL
Not taken any good pics yet but will do one night this week
THIS - with some change
Turned into THIS
My 2 Scoobs
Picked it up yesterday an havent stopped smiling
R reg Impreza Turbo 2000
Specs
Exterior
tinted windows
Angel eyes - Swapping them for standard crystal lights
JUN splitter - To be fitted
Crystal indicators
Crystal side repeater
HID kit - To be fitted will do that when i get the crystals i think
Interior
Blitz dtt turbo timer/lap timer/ everything timer lol
2x Auto gauges in a pillar pod - Oil pressure/ boost
STI interior
Sony cd player
2x12" subs an amp - to be fitted
Engine
EJ20 turbo
HKS SSQ blow off valve
HSK mushroom filter
Boost up to 1 bar
remapped by Andy Forrest
Magnex oval full system 2.5"
GREDDY clutch
Wheels/Suspension/Brakes
17" speedline chronos in what looks like cheap cheap tyres
lowered on tein springs 35mm
EBC drilled/grooved discs an pads
I think thats it i may of missed bits
Im going to clean the engine bay this weekend as its a bit dirty.
Plans
Crystal headlights
Chrome for the engine bay
Poly bush it
strut brace
some go fast bits
Paint the calipers on Friday
I love it
I'm tempted to quit my job an drive it all the time BUT i wouldnt be able to fuel it LOL
Not taken any good pics yet but will do one night this week
THIS - with some change
Turned into THIS
My 2 Scoobs
#3
Scooby Regular
First mod should be a proper set of Tyres and alignment. Mine had Falkens on it when I got it and they were crap. It also hadn't had alignment done in god knows how long.
Stuck Goodyear Eagle F1 GSD3's on, and had alignment just set to Subaru standard(was going to go with fast road settings, but wanted tyres to last as long as possible). The car was transformed! Amazing grip wet or dry, and the Goodyears were very predictable in the wet...you don't get that with a cheap tyre, they just tend to let go.
Stuck Goodyear Eagle F1 GSD3's on, and had alignment just set to Subaru standard(was going to go with fast road settings, but wanted tyres to last as long as possible). The car was transformed! Amazing grip wet or dry, and the Goodyears were very predictable in the wet...you don't get that with a cheap tyre, they just tend to let go.
#5
Guest
Posts: n/a
The WR1 blue Scoob is a sport mate - Sold it to my mate it goes next weekend
I bought it in October then found out last week i could insure a turbo so bought the turbo
Dont worry the car will have a JUN front lip an STI 6 spoiler next weekend
Yea i am going to get some good tyres. The tyres on teh car have done 300 miles and are still ****. They are Kuhmo's... I had them on my Focus an they were ok but then again my focus wasnt as violently fast haha
I bought it in October then found out last week i could insure a turbo so bought the turbo
Dont worry the car will have a JUN front lip an STI 6 spoiler next weekend
Yea i am going to get some good tyres. The tyres on teh car have done 300 miles and are still ****. They are Kuhmo's... I had them on my Focus an they were ok but then again my focus wasnt as violently fast haha
Trending Topics
#10
Guest
Posts: n/a
lol Blu Scoob - The rear lights are class :-)
Midnight runner. The thought has crossed my mind but im going to leave her silver
Bought new numberplates and a blue Intercooler silicon hose
Cleaned the engine bay with "gunk" then steam cleaned it. Took hours
Got under the car for the first time - Totally mint. NO rot or anything as i took the skirts off to check.. Seems like i got a bargain
Going to get the STI 6 spoiler this week an get my JUN front splitter on it aswell
Cheers for the comments - I LOVE IT still
Burned off a tank of fuel last night
Midnight runner. The thought has crossed my mind but im going to leave her silver
Bought new numberplates and a blue Intercooler silicon hose
Cleaned the engine bay with "gunk" then steam cleaned it. Took hours
Got under the car for the first time - Totally mint. NO rot or anything as i took the skirts off to check.. Seems like i got a bargain
Going to get the STI 6 spoiler this week an get my JUN front splitter on it aswell
Cheers for the comments - I LOVE IT still
Burned off a tank of fuel last night
#12
Guest
Posts: n/a
what do they look like mate. And whats the benefit of it.
Here is a couple of pics - Wheels are minging still haha
Willg et crystal fronts, jun front splitter on(sitting in our room) and an sti6 spoiler on her OR should i run spoilerless.... Im not sure
Bodywork is mint minus a tiny dent on the drivers side passenger door
Here is a couple of pics - Wheels are minging still haha
Willg et crystal fronts, jun front splitter on(sitting in our room) and an sti6 spoiler on her OR should i run spoilerless.... Im not sure
Bodywork is mint minus a tiny dent on the drivers side passenger door
Last edited by Connor_scotland; 21 February 2009 at 03:50 PM.
#17
Guest
Posts: n/a
LOL dogs bollocks
Its the model mate not the year My car is an R reg 1998 Turbo 2000
Here is the engine bay the day i got the car - Thats what was putting me off going to see it - Turned out MINT
I did this last week - Took a few hours with some "gunk" an a tooth brush. Going to do it again an make it cleaner
Also got some Blue hoses fitted aswell - Intercooler etc - Dump valve is hidden down beside the intercooler aswell
Alloy rad fitted due to the other one bursting
Couple of trick stickers added to the back window aswell - I love these stickers
EJ20 inside
ILOVEBOOST
Crystal headlights arrive tomorrow aswell
Also going to paint the "plenums"(big silver bits wasnt sure what they were lol) in red this weeked aswell to tidy her up even more
Its the model mate not the year My car is an R reg 1998 Turbo 2000
Here is the engine bay the day i got the car - Thats what was putting me off going to see it - Turned out MINT
I did this last week - Took a few hours with some "gunk" an a tooth brush. Going to do it again an make it cleaner
Also got some Blue hoses fitted aswell - Intercooler etc - Dump valve is hidden down beside the intercooler aswell
Alloy rad fitted due to the other one bursting
Couple of trick stickers added to the back window aswell - I love these stickers
EJ20 inside
ILOVEBOOST
Crystal headlights arrive tomorrow aswell
Also going to paint the "plenums"(big silver bits wasnt sure what they were lol) in red this weeked aswell to tidy her up even more
Last edited by Connor_scotland; 05 March 2009 at 09:20 PM.
#21
911 C4 pilot
iTrader: (7)
Join Date: Jan 2007
Location: In an Air Cooled Porsche
Posts: 3,578
Likes: 0
Received 0 Likes
on
0 Posts
Get some Meguairs APC & some Swissvax burshes to do the engine with - much better than gunk IMHO & doesn't smell either. P21s is another good de-greaser.
Liking the car though fella
Liking the car though fella
#23
Guest
Posts: n/a
Court was a waste of time the lad never turned up so they issued a warrant for him- He drove into my Vetcra an took off last year i found out who he was an dealt with it an got the car repaired BUT the police still want to do him..... Thats the 4th time he hasnt turned up now
Got my crystal headlights yaaaaay will fit them today
How do i remove the lights
Got my crystal headlights yaaaaay will fit them today
How do i remove the lights
#29
Guest
Posts: n/a
Rights thats her on - Hayward + Scott angled exhaust
Took a little longer than expected as i never bought a gasket so me an my mate made one an its perfect.
Lovely noise off it and you cant really hear it in the car so no droning.
Will make a drive by video tonight
A video of it idling - This is the first time start
http://www.youtube.com/watch?v=RfORttx6Ku0
Took a little longer than expected as i never bought a gasket so me an my mate made one an its perfect.
Lovely noise off it and you cant really hear it in the car so no droning.
Will make a drive by video tonight
A video of it idling - This is the first time start
http://www.youtube.com/watch?v=RfORttx6Ku0
Last edited by Connor_scotland; 15 March 2009 at 08:10 PM.