B*st*rd........look what I've just done!!
#5
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
If its not cracked all the way through (ie, now in 2 pieces) I reckon a bit of filler and a tin of black spray and you could get that as good as new, did the same to my carbon MGF Splitter when I tried ti get on my mates driveway, filled, primed and painted and it was as good as new, well black new and not carbon new!
#6
Scooby Regular
Join Date: Feb 2006
Location: Going further than the station and back !!! ZZZZZZZZZzzzzzzzzzzzz
Posts: 11,097
Likes: 0
Received 0 Likes
on
0 Posts
bit of patience and thought should have that fixed mate....
if its cracked all the way through, you might have to brace it from behind and clamp it in place until set....
then you can get to work with the filler, file and black paint....
bummer though....
i'm sure it will look fine
if its cracked all the way through, you might have to brace it from behind and clamp it in place until set....
then you can get to work with the filler, file and black paint....
bummer though....
i'm sure it will look fine
Trending Topics
#14
Not perfect, but.................
Better than it was!!
It was split all the way through, so I had to fibreglass it (first I've done) and then clamp it until it was set.......as suggested by WRX_Dazza.
Still needs the overspray polishing out a bit, but it's not too bad really.
It was split all the way through, so I had to fibreglass it (first I've done) and then clamp it until it was set.......as suggested by WRX_Dazza.
Still needs the overspray polishing out a bit, but it's not too bad really.