Defi gauges
07 September 2013, 01:12 PM
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Nov 2010
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Defi gauges
My defi gauges have stopped working all of a sudden. I narrowed it down to the meter output wire so I invested in a new one but still nothing if I then wire each of the 3 meters separately still nothing.
The control box lights up so there is power and also it beeps to suggest they are ready to read but nothing
I have the bf series turbo oil temp and pressure
Any ideas any one, or possibly been able to borrow a control box to test?
The control box lights up so there is power and also it beeps to suggest they are ready to read but nothing
I have the bf series turbo oil temp and pressure
Any ideas any one, or possibly been able to borrow a control box to test?
07 September 2013, 06:18 PM
#2
My defi gauges have stopped working all of a sudden. I narrowed it down to the meter output wire so I invested in a new one but still nothing if I then wire each of the 3 meters separately still nothing.
The control box lights up so there is power and also it beeps to suggest they are ready to read but nothing
I have the bf series turbo oil temp and pressure
Any ideas any one, or possibly been able to borrow a control box to test?
The control box lights up so there is power and also it beeps to suggest they are ready to read but nothing
I have the bf series turbo oil temp and pressure
Any ideas any one, or possibly been able to borrow a control box to test?
RED wire: PERMANENT live, (ie, even when ign off).
ORANGE wire: SWITCHED live, (ie, only when ign on SECOND CLICK, NOT first)
WHITE wire: lighting live.
BLACK wire: decent earth.
Check that those are as they should be before doing anything else. Use a multi-tester or one of these: http://www.ebay.co.uk/itm/CAR-LIGHT-...item27d0757330
Thread
Thread Starter
Forum
Replies
Last Post