dodd1980

Where can i find the plugs that connect to the electric adjusters?

I have a Bug WRX, i'm removing the UK300 lights which seems to have larger 3 pin plugs on which don't fit standard lights

alcazar

iTrader: (2)

I would imagine those would be loom specific, so impossible to get.
How many wires in them?

dodd1980

they have 3 wires, basically i want to go back to standard so they should be in every car i guess?

alcazar

iTrader: (2)

Agreed, but unless you cut them off a loom on a scapper, you won't get them, I reckon.

dodd1980

Not really what i want to hear but it is probably true!!, i think the plug is made by AMP, so might try to find a catalogue

alcazar

iTrader: (2)

Plenty of scrappers about, can't see anyone NOT wanting to sell them to you......

Or try here: www.vehiclewiringproducts.co.uk

JonMc

iTrader: (51)

If you are putting standard WRX lights on I'm changing to the STI 6-pin connectors if I can get some - I'll cut mine off and let you have them for £10 delivered (plus paypal fees or gift it)

dodd1980

That would be great,

Thanks very much

JonMc

iTrader: (51)

If you can wait until next weekend so I can cut them off in daylight

PM me you address and I'll respond with my paypal details

martin850

iTrader: (51)

Have you got the connectors now then Jon?

I have managed to get hold of a pair plus JDM switch and the plug that goes into it from scoobyspares.

JonMc

iTrader: (51)

No I haven't mate, plan B is in force which will involve rewiring the factory loom and using 18 x 2.8mm crimps and some insulating sleeves

I also have some universal 6-way connectors to make it easier

Being a time-served spark has it's benefits

martin850

iTrader: (51)

Sounds like it mate cos what you just written confuses the hell out of me. I have asked for as much wire on each of the plugs as possible and hopefully it should be easier to see which wire goes to where. May need to pick your brains if I get problems?

JonMc

iTrader: (51)

I've looked at it and you can re-use the 4 factory wires for the signals and then just need to find a live and earth at each end which is a piece of cake TBH, use the live from the dipped beam so the leveler motor only works when the lights are on and anything at the switch end. If you need some help I have the subaru workshop manuals which includes the wiring diagrams

martin850

iTrader: (51)

That doesn't sound too bad. Thanks Jon

JonMc

iTrader: (51)

Posted them out today for you