Elec mirrors blowing fuse
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2011
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Elec mirrors blowing fuse
When I picked my car up at the weekend the electric mirros weren't working. I have just replaced the fuse only to find that the mirrors still didn't work and that me trying them just blew the new fuse.
Does this mean that the motor knackered?
If so where are they located?
Any help would be appreciated
Does this mean that the motor knackered?
If so where are they located?
Any help would be appreciated
#2
Scooby Regular
iTrader: (2)
It could be the motor(s), or it could be a wire pinced somewhere.
Start by removing the door cards, which exposes the wiring to the mirrors. Make sure that all is OK, the disconnect ONE and try again. If it still blows the fuse, reconnect, disconnect the opposite side and try again. If it STILL blows the fuse, it's likely the wiring near the switch, but could, of course, still be in either door
Check where it comes through from the footwell to the door.
At least if it STOPS blowing the fuse, you'll know which mirror, if either, is the problem.
Start by removing the door cards, which exposes the wiring to the mirrors. Make sure that all is OK, the disconnect ONE and try again. If it still blows the fuse, reconnect, disconnect the opposite side and try again. If it STILL blows the fuse, it's likely the wiring near the switch, but could, of course, still be in either door
Check where it comes through from the footwell to the door.
At least if it STOPS blowing the fuse, you'll know which mirror, if either, is the problem.
Thread
Thread Starter
Forum
Replies
Last Post