fuel cut controller. help?
#1
Scooby Regular
Thread Starter
Join Date: Apr 2005
Location: in deep from behind
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
fuel cut controller. help?
could anyone help me? ive got meself a TRL fuel cut controller could anyone tell me where the wires go.
this is what it says on the box
red=12v (ign)
black=0v (gnd)
green=map input
blue= map output
my main concern is what colour wires do i cut into on the ecu as i dont want to get it wrong
cheers
dave
the car is a 94 wrx
this is what it says on the box
red=12v (ign)
black=0v (gnd)
green=map input
blue= map output
my main concern is what colour wires do i cut into on the ecu as i dont want to get it wrong
cheers
dave
the car is a 94 wrx
#2
You could try here for a wiring diagram: http://www.northursalia.com/modifica...ng/wiring.html
The wire you have to cut is the signal wire from the pressure (MAP) sensor - plug B43, pin 4.
The wire you have to cut is the signal wire from the pressure (MAP) sensor - plug B43, pin 4.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM