Fog lights on STi Type UK
#1
Just out of interest I took the fog light covers off my STi today to reveal....nothing! Just holes in the bodywork.
I'm a bit suprised there are no fog lights fitted as standard. Has anybody else taken a look under their covers?
I'm a bit suprised there are no fog lights fitted as standard. Has anybody else taken a look under their covers?
#2
I was surprised that the foglights were'nt in the main headlights etc. But then the foglights on my old Mk1 Impreza did very little, so there was no great loss.
The situations compounded on the Prodrive STI in that the mounting plates are'nt there either
The situations compounded on the Prodrive STI in that the mounting plates are'nt there either
#6
Scooby Regular
iTrader: (4)
Join Date: Sep 1999
Location: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Posts: 11,468
Received 22 Likes
on
19 Posts
Yes it's a bit bare beneath the Prodrive version barge boards. But I have a plan said baldrick Making some replacement covers (so not to damage the oringinals) up in Carbon Fibre with adapters to house projector Fog lamps
Tony
Tony
#7
Scooby Regular
Join Date: Oct 2004
Location: London
Posts: 4,797
Likes: 0
Received 0 Likes
on
0 Posts
Quenby's fitted HIDs in the holes under my STi's blankers at the front. Apparently Subaru told them that you can't fit lights into the non-prodrive STi, but in actual fact you can. I think it improves the look of the car, as well as lighting up the plcae like a lighthouse.
Charlie.
Charlie.
Trending Topics
#9
You definatly can fit the standard OEM fogs in an a non Prodrive STi as I have em in mine. In fact they were fitted by the dealer (part of a load of extras I blagged).
The real bummer is that to fit the STi covers you have to remove the lamps as the bar that holds the fog light in place gets forced out of the way by the fog lamp dish. A bit of 'adjustment' requred there me thinks...
Ids
The real bummer is that to fit the STi covers you have to remove the lamps as the bar that holds the fog light in place gets forced out of the way by the fog lamp dish. A bit of 'adjustment' requred there me thinks...
Ids
#10
Ids,
Do you have any pictures? I was thinking of getting the driving lamps from TSL and fitting them to my ukSti stardard..
Mind you, I guess that the switch from Subaru is proberbly more than the lights themselves.....
Ta
Gareth.
Do you have any pictures? I was thinking of getting the driving lamps from TSL and fitting them to my ukSti stardard..
Mind you, I guess that the switch from Subaru is proberbly more than the lights themselves.....
Ta
Gareth.
#13
Gareth,
Unfortunatly I havent.... still havent got round to taking any piccys of the car.... and now I have took them out they wont be in till the winter.
Looks like a standard WRX though in that sese
Ids
Unfortunatly I havent.... still havent got round to taking any piccys of the car.... and now I have took them out they wont be in till the winter.
Looks like a standard WRX though in that sese
Ids
Thread
Thread Starter
Forum
Replies
Last Post
Danny0608
Subaru
6
27 September 2015 02:16 PM
Danny0608
Subaru Parts
0
12 September 2015 02:59 PM