Jdm wiper speed
#1
Jdm wiper speed
I really don't like the way the rear wiper is constant and would prefer it to be every 8 seconds or so.
I know very little about electrics and assumed I may need resistors, and other wizardry to slow it down.
Until I found this relay.
Would it be just a matter of taking mine out, putting this in and following the guide?
https://www.carbuilder.com/uk/programmable-intermittent-wiper-relay?gclid=CjwKCAiApOvwBRBUEiwAcZGdGKaJyPnlEl-Oquh0gkXi6SCuDHltF7KMhuxv2m6ADDCxVncvQ-7ivxoCpyEQAvD_BwE
I know very little about electrics and assumed I may need resistors, and other wizardry to slow it down.
Until I found this relay.
Would it be just a matter of taking mine out, putting this in and following the guide?
https://www.carbuilder.com/uk/programmable-intermittent-wiper-relay?gclid=CjwKCAiApOvwBRBUEiwAcZGdGKaJyPnlEl-Oquh0gkXi6SCuDHltF7KMhuxv2m6ADDCxVncvQ-7ivxoCpyEQAvD_BwE
#2
Scooby Regular
#3
Scooby Regular
#5
Maybe I should have removed the rear wiper motor first but sadly the relay is way too big to fit.
maybe earlier models had a large on but this one doesn't fit compared to the original.
I have contacted the company to see if they do a delayed one in a smaller size.
maybe earlier models had a large on but this one doesn't fit compared to the original.
I have contacted the company to see if they do a delayed one in a smaller size.
#6
Scooby Regular
Never thought it would due to the extra "gubbins" inside the case.
Just mount it separately - not on the bracket
Just mount it separately - not on the bracket
Trending Topics
#8
Scooby Regular
Should be pretty easy/straight forward to obtain a standard relay holder to suit, some wire and the appropriate spade connectors to suit the original loom plug.
#9
Literally just spent the last 5 mins thinking this. I have the larger spade connectors but not the smaller ones.
it also looks like the larger relay can easily sit on the bracket where the old one was. Albeit sideways 😀.
Just ordered the wire and connectors and will keep you posted.
Thread
Thread Starter
Forum
Replies
Last Post