projector kit for Impreza 2003 blob eye uk
#1
Scooby Newbie
Thread Starter
projector kit for Impreza 2003 blob eye uk
Hi guys ive been trying to find out info etc on these projector kits for my blobeye, seen vids on youtube etc yeah they look great but where the hell can you get them from and how much??? If any has got any info it will be much appreciated
Nate
Nate
#4
Trending Topics
#14
Scooby Regular
iTrader: (1)
Join Date: Feb 2015
Location: Walsall west mids
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
Genuine mate put em in the oven as it heats them all equally, you b ther all day using a hair drier as by the time you've warmed each side the other side has cooled down lol
https://www.ebay.co.uk/ulk/itm/152028264010 bro82 they couple quid cheaper now too 19.99
https://www.ebay.co.uk/ulk/itm/152028264010 bro82 they couple quid cheaper now too 19.99
Last edited by B9SLJ; 06 April 2016 at 06:44 AM.
#16
Scooby Regular
iTrader: (2)
Join Date: Mar 2014
Location: Wakefield
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
#20
Scooby Regular
I've been umming and arring about this. I even emailed the Retrofitlab about the adapter plates as I wasn't sure whether the eBay ones would work. It put me off when RFL siad they were like £20 for some metal plates.
So the ones in your link sit nice and sturdy then B9SLJ? Did you wire up the high beam shield?
So the ones in your link sit nice and sturdy then B9SLJ? Did you wire up the high beam shield?
#22
Scooby Regular
So step one..
I've had to open out the entrance into the projectors as H1 bulbs won't fit. I've also got to source some screws as they haven't been provided to fix the shrouds.
Step two..
Baking the lights.. I tried 150 degrees for 4 mins, my light is now like a big blob of jelly! LOL!. Managed to fudge it back together and get it back in the car. Trip to a breakers this weekend I think!
B9SLJ - I'm guessing you wired the black and red into the main beam cables? On mine I have a red and a red and blue to my main beam, which is the posi? Guessing the red only?
I've had to open out the entrance into the projectors as H1 bulbs won't fit. I've also got to source some screws as they haven't been provided to fix the shrouds.
Step two..
Baking the lights.. I tried 150 degrees for 4 mins, my light is now like a big blob of jelly! LOL!. Managed to fudge it back together and get it back in the car. Trip to a breakers this weekend I think!
B9SLJ - I'm guessing you wired the black and red into the main beam cables? On mine I have a red and a red and blue to my main beam, which is the posi? Guessing the red only?
Last edited by adamroutley; 18 May 2016 at 10:30 PM.
#23
Scooby Regular
iTrader: (1)
Join Date: Feb 2015
Location: Walsall west mids
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hear your havin trouble mate , Maybe the supplier has had a bad batch if the h1s don't fit an screws are missing. Mine were ok
I only set my oven at 90c to split the lights
i would say red only is live , but double check with tester before u connect, will have a look at my own lights later to see wat colours I have, my car was a bugeye that I converted to blob so wiring is slightly different anyway
I only set my oven at 90c to split the lights
i would say red only is live , but double check with tester before u connect, will have a look at my own lights later to see wat colours I have, my car was a bugeye that I converted to blob so wiring is slightly different anyway
#25
Scooby Regular
Sorry to hear your havin trouble mate , Maybe the supplier has had a bad batch if the h1s don't fit an screws are missing. Mine were ok
I only set my oven at 90c to split the lights
i would say red only is live , but double check with tester before u connect, will have a look at my own lights later to see wat colours I have, my car was a bugeye that I converted to blob so wiring is slightly different anyway
I only set my oven at 90c to split the lights
i would say red only is live , but double check with tester before u connect, will have a look at my own lights later to see wat colours I have, my car was a bugeye that I converted to blob so wiring is slightly different anyway
#26
Scooby Regular