MY01 Gauges
#1
Track Day Organiser
Thread Starter
I have a column mounted boost gauge
I am considering some more gauges
Now I replaced my OEM Stereo with a single DIN Radio and I was considering putting 2 or 3 Gauges in the Viod below the radio
Question
Has anybody done this ?
if so any pic's ?
recomendation of any sort
Phil
I am considering some more gauges
Now I replaced my OEM Stereo with a single DIN Radio and I was considering putting 2 or 3 Gauges in the Viod below the radio
Question
Has anybody done this ?
if so any pic's ?
recomendation of any sort
Phil
#2
Hi Phil,
I also wonder for gauges in my lighted modified MY01.
This one is from the U.S. Sparco Show Car.
IMHO you can only put 43mm gauges on a din panel.
You can go to Omori for the pictures 'cause they have Din panels driver oriented.
Some people take the Subaru Forester pod ...
here it is still 43mm but...
some put 52mm gauges.
For lot's of pics, try i-club dress up and style.
But if price do not care, I'd love to go with Défi pod in 60mm with Défi
or Greddy
or Omori (sorry, no pic).
[Edited by el crichon wrx - 2/24/2002 6:25:34 AM]
I also wonder for gauges in my lighted modified MY01.
This one is from the U.S. Sparco Show Car.
IMHO you can only put 43mm gauges on a din panel.
You can go to Omori for the pictures 'cause they have Din panels driver oriented.
Some people take the Subaru Forester pod ...
here it is still 43mm but...
some put 52mm gauges.
For lot's of pics, try i-club dress up and style.
But if price do not care, I'd love to go with Défi pod in 60mm with Défi
or Greddy
or Omori (sorry, no pic).
[Edited by el crichon wrx - 2/24/2002 6:25:34 AM]
#5
Scooby Regular
Join Date: Dec 2001
Location: Just far enough from sunny Liverpool
Posts: 6,963
Likes: 0
Received 0 Likes
on
0 Posts
i have removed the air vents in the centre console and had a couple of aluminium plates made to take 52mm gauges.
thanks to phil_stephens for help uploading the photo!
simon b.
[Edited by RRH - 2/26/2002 10:27:58 PM]
thanks to phil_stephens for help uploading the photo!
simon b.
[Edited by RRH - 2/26/2002 10:27:58 PM]
#6
Track Day Organiser
Thread Starter
Trending Topics
#9
Scooby Regular
Join Date: Dec 2001
Location: Just far enough from sunny Liverpool
Posts: 6,963
Likes: 0
Received 0 Likes
on
0 Posts
phil,
i thought about doing that but couldn't find gauge small enough to fit- although with the link above it may be worth a try.
i got two sets of the ali panels made and am only using one, so if you want to mail me offline with details your more than welcome to them with my compliments
i thought about doing that but couldn't find gauge small enough to fit- although with the link above it may be worth a try.
i got two sets of the ali panels made and am only using one, so if you want to mail me offline with details your more than welcome to them with my compliments
#11
Track Day Organiser
Thread Starter
Thanks to el crichon wrx
That website has some cool gauges
Right I sussed which gauges/where they are going/and who's going tofix them
But what gauges do I need
I have a column Boost gauge allready
Oil Pressure and Temp
Amps
ANY SUGGESTIONS
PHIL
That website has some cool gauges
Right I sussed which gauges/where they are going/and who's going tofix them
But what gauges do I need
I have a column Boost gauge allready
Oil Pressure and Temp
Amps
ANY SUGGESTIONS
PHIL
#12
Phil,
if you're a real 'Hardcore Overclocker' - Not in a Computer Hardware BBS ? - you should go for an EGT gauge to monitor your Exhaust Gas Temperature. You need to drill the exhaust header to fit the probe ! !
Oil temperature or Pressure in 2nd.
if you're a real 'Hardcore Overclocker' - Not in a Computer Hardware BBS ? - you should go for an EGT gauge to monitor your Exhaust Gas Temperature. You need to drill the exhaust header to fit the probe ! !
Oil temperature or Pressure in 2nd.
Thread
Thread Starter
Forum
Replies
Last Post