Vonzack

As above really, anything to look out for when removing the passenger side door card on a MY03 WRX. I'm having to remove it to fit a new mirror. I don't want to miss anything and break a fixing.

Cheers.

alcazar

iTrader: (2)

I can tell you about a classic, and I don't reckon it'll be far out.

There's a screw under a cover near the front of the card, and another under another cover just under the door pull.

Then gently prize up the door handle surround, but DON'T undo the screw in it's centre.

Also, gently prize up the window switch, and release it's wiring.

It's then a case of inserting a flat-bladed screwdriver along the bottom and sides, slide it along until you find a clip and gently prize each one up. they come easily, and don't worry if you break one or two, Scoob dealers keep 'em in for pennies each, or just miss the odd one out.

Once it's released from the clips, lift it upwards to release the top and then pull towrads you.

Almost takes longer to describe than to do

HTH, Alcazar

Vonzack

Cheers Alcazar, I'll give it a go.