into the fron doors of a 95 impreza wrx import

any1 wanna give me a guide as to how to do this pls?

 

have a look at the ICE section FAQ maybe

 

Also look at www.chiark.co.uk



Alcazar

 

As linked to in the FAQ...

 

heheh still dble dutch jargon, next step ill bung any1 that installs them for me:P

 

Are there any there already? If so, wiring is easy, if not, you'll need wiringso a good ICE installer would be an idea if you don't know what you're doing

Use Chiark's site to help you get the doorcards off for a look at the hole and sizing.

Buy some that'll fit, (or nearly fit and use spacers, remove old, fit new, job's a good'un.

Alcazar

 

installing of speakers i can do, its the door cards i need help with so any1 close by to me id really appreciate the help of some 1 too come down and show me pls:P

 

I have a 95 WRX import too and a couple of weeks ago replaced all my speakers. The door cards are fairly easy. First unscrew the one Phillips head screw in the plastic door-pull. Then unclip the small plastic frame around the door release mechanism. Next pull away the poppers/clips at the bottom of the door card, you will then have to tilt the card and pull upwards to unhinge it from the metal clasps at the top of the door. You might need to unplug the electric window cables to fully access the speakers - I managed just to spin the door card up and over the window and it balanced there safely.

Just ask if you need more advice - or PM me.

 

cheers 555, i must b a tad thick still cant do this lolz, so any1 in the n/e wanna pop over and show me wot im doing wrong????

 

Can't help you any more SS - it REALLY IS SIMPLE. One screw to undo, one surround to prise off from around the door pull mechanism and then get your fingers under the bottom of the trim and pull firmly towards you - easy.

 

ss if your realy stuck have a run over to billingham its near middlesbrough and ill take em off for ya