Carbon Dash Kit from NitoSport
#1
Scooby Regular
Thread Starter
Join Date: Mar 2003
Location: Tyne Tees Scoobies
Posts: 2,689
Likes: 0
Received 0 Likes
on
0 Posts
Ok got the kit and installed it apart from the handbrake panel that is to follow later..........
I bought all the bits from NitoSport
I have put some photo's of the kit on my webspace...
Some of files are large so may take time to load if you are on a dialup.
Click Here to See pics
I bought all the bits from NitoSport
I have put some photo's of the kit on my webspace...
Some of files are large so may take time to load if you are on a dialup.
Click Here to See pics
#2
Scooby Regular
Join Date: Jun 2002
Location: From the land of dings and dents
Posts: 4,556
Likes: 0
Received 0 Likes
on
0 Posts
hi mate, can't see the after pics???
I am thinking of getting a kit like this ,how easy is it to fit and what tools and tips can you give
cheers
Nige
I am thinking of getting a kit like this ,how easy is it to fit and what tools and tips can you give
cheers
Nige
#4
Scooby Regular
Thread Starter
Join Date: Mar 2003
Location: Tyne Tees Scoobies
Posts: 2,689
Likes: 0
Received 0 Likes
on
0 Posts
You Only need a pozidrive and a flat blade, a cloth to stop you from damaging the trim.
The lower vents take some getting out, but you just need to take it easy and not get frustrated and damage them. It does make it easyer because you have the new panels and you can see were the fixing points are to help remove the old one's.
The gaitor and silver plate all come seperate so you need to bolt it to the gearstick suround and all the bolts are provided.
Its not a hard job to do, you just need to take your time so as not to damage anything.
Im just waiting for the handbrake suround and im also going to get the lid for the box on top of the dash.
The lower vents take some getting out, but you just need to take it easy and not get frustrated and damage them. It does make it easyer because you have the new panels and you can see were the fixing points are to help remove the old one's.
The gaitor and silver plate all come seperate so you need to bolt it to the gearstick suround and all the bolts are provided.
Its not a hard job to do, you just need to take your time so as not to damage anything.
Im just waiting for the handbrake suround and im also going to get the lid for the box on top of the dash.
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Mar 2003
Location: Tyne Tees Scoobies
Posts: 2,689
Likes: 0
Received 0 Likes
on
0 Posts
no instructions, but as you have the new panels you can see were the fixing pints are. The hardest bits to remove were the lower vents on both sides, but if you get stuck ring jane or nito abd they will help you out.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM