Notices
ICE Serious sounds for serious cars.

ice expert needed

Thread Tools
 
Search this Thread
 
Old 04 September 2011, 03:50 PM
  #1  
stuward
Scooby Regular
Thread Starter
 
stuward's Avatar
 
Join Date: Jul 2011
Location: warminster
Posts: 100
Likes: 0
Received 0 Likes on 0 Posts
Default ice expert needed

will the following fit my 2003 sti

front door
Alpine SPX-13REF


rear doors

Alpine SPS-410


hope some one can help
Old 05 September 2011, 07:47 AM
  #2  
topman2180
Scooby Regular
 
topman2180's Avatar
 
Join Date: Nov 2009
Location: Berkshire
Posts: 525
Likes: 0
Received 0 Likes on 0 Posts
Default

The factory speakers in your car have tiny magnets on them. When you put aftermarket speakers in the magnets will be larger so when you wind down your window it will hit the magnet and stop the window from going down. I have 5 1/4 speakers in the front , I believe you can also fit 6 1/2 inch in the front but both require you to fit mdf adapters or spacers same with rear.
Old 06 September 2011, 04:47 PM
  #3  
RE54
Scooby Regular
iTrader: (6)
 
RE54's Avatar
 
Join Date: Aug 2010
Location: essex
Posts: 451
Likes: 0
Received 0 Likes on 0 Posts
Default

if you buy the adaptors from the USA you can fit most 6.5 comps in the front, and most 5.25 in the rear.
Old 06 September 2011, 04:49 PM
  #4  
RE54
Scooby Regular
iTrader: (6)
 
RE54's Avatar
 
Join Date: Aug 2010
Location: essex
Posts: 451
Likes: 0
Received 0 Likes on 0 Posts
Default

they have a 59mm depth, so should fit ok, but how much are they costing you? lots of other good options for similar money that are better value. whats your budget?
Old 07 September 2011, 02:56 PM
  #5  
vindaloo
Scooby Regular
 
vindaloo's Avatar
 
Join Date: Apr 2003
Location: South Bucks
Posts: 3,213
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by stuward
will the following fit my 2003 sti

front door
Alpine SPX-13REF


rear doors

Alpine SPS-410


hope some one can help
6.5s would be preferable. Any aftermarket speaker is likely to require a spacer ring. Either by buying plastic ones, making or buying MDF (ebay) or by gutting the standard speakers and using the carcase.

Seal any apertures in the doors with dynamat/flashing tape and/or MDF or ply.

Amp the front speakers at least and fit a decent 2x150 watt amp. Or at least, something better than 2x100.

J.
Old 07 September 2011, 03:20 PM
  #6  
stuward
Scooby Regular
Thread Starter
 
stuward's Avatar
 
Join Date: Jul 2011
Location: warminster
Posts: 100
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by vindaloo
6.5s would be preferable. Any aftermarket speaker is likely to require a spacer ring. Either by buying plastic ones, making or buying MDF (ebay) or by gutting the standard speakers and using the carcase.

Seal any apertures in the doors with dynamat/flashing tape and/or MDF or ply.

Amp the front speakers at least and fit a decent 2x150 watt amp. Or at least, something better than 2x100.

J.

j cheers for the advice i have now change the speakers i am putting in due to supplier letting me down and am going with

front

Focal Polyglass 130VRS 13cm Slim Fit component speakers

rear
Focal Access 100CA1 10cm Speakers

i have 5 chanel mrv 450 alpine amp wich is rated at 4ohm same as speakers.

im a royal marine so good at getting dirty but not at fitting stuff im led to belive very straight forward.

i have asked alocal company to do it but the want 1200 to fit speakers and amp is that about right or can i easily do my self.
Old 07 September 2011, 10:25 PM
  #7  
vindaloo
Scooby Regular
 
vindaloo's Avatar
 
Join Date: Apr 2003
Location: South Bucks
Posts: 3,213
Likes: 0
Received 0 Likes on 0 Posts
Default

I think £1200 is pushing it a bit unless that includes supplying the speakers and cabling up to the amp.

Whatever front speakers you go for will require an amount of work to mount. Plus the wiring from amp to speakers and mounting the crossovers.

Personally, I'd up the size of the front speakers. The holes in the doors will take bigger components and generally, they'll sound better.

Going with Focal, you can fit Polyglass 165VRS in the fronts . You'd need a 10 or 12mm spacer ring to ensure clearance for the window mech on the fronts.

I'd be tempted to bridge the amp and run the fronts off it. Leaving the rears driven by the head unit.

There's loads of info in this section. Unfortunately, accessing it isn't as easy as it should be. This might help...
https://www.scoobynet.com/ice-2/8696...-progress.html

For other info, try in google "site:scoobynet.com AMP WIRING" or similar. To get reasonably current info, use "more search tools" in google and limit the search to items from the last 12 months.

HTH

J.
Old 08 September 2011, 09:11 AM
  #8  
alcazar
Scooby Regular
iTrader: (2)
 
alcazar's Avatar
 
Join Date: Jun 2002
Location: Rl'yeh
Posts: 40,781
Received 27 Likes on 25 Posts
Default

I'm assuming you have actually gone out and listened to the speakers of your choice? If not, how did you choose them? remember that one man's meat.............

I went to a local Halfords with loads of speaker choice, did blind testing with the help of my youngest, and ended up with Sony speakers, front and rear.........I liked the sound, and others have commented on how good it is.

I have 6.5 3-way speakers front and 6x9's 3-way in the rear, both fitted using home-made mdf spacers, not visble once mounted at the front, covered with proper cloth to match the rear shelf at the rear.

Fitting is NOT rocket science, and £1200 quid is a "Senior-Cummin" quote.
Old 08 September 2011, 10:09 AM
  #9  
topman2180
Scooby Regular
 
topman2180's Avatar
 
Join Date: Nov 2009
Location: Berkshire
Posts: 525
Likes: 0
Received 0 Likes on 0 Posts
Default

I think the quoted was for £120.00 surely?. 24 hours work at £50 an hour is £1200. Doesnt take that long my mate did front speakers and wired in amp in about 4 hours and halfs hours and he isnt a professional installer.
Old 08 September 2011, 12:48 PM
  #10  
stuward
Scooby Regular
Thread Starter
 
stuward's Avatar
 
Join Date: Jul 2011
Location: warminster
Posts: 100
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by topman2180
I think the quoted was for £120.00 surely?. 24 hours work at £50 an hour is £1200. Doesnt take that long my mate did front speakers and wired in amp in about 4 hours and halfs hours and he isnt a professional installer.

no he quaoted 1200 as it was a two day job apperently to do and 4 speakers. i was supplying the parts. im currently our in afghanistan so to be honest think they were taking the **** really as i wanted to have it done for when i got back but hey im sure i can bodge my way round it lol
Old 08 September 2011, 01:11 PM
  #11  
topman2180
Scooby Regular
 
topman2180's Avatar
 
Join Date: Nov 2009
Location: Berkshire
Posts: 525
Likes: 0
Received 0 Likes on 0 Posts
Default

I paid £300 for my head unit , £160 for amp , £120 for door speakers , £300 for sub, £30 for cabling and £150 to fit it. Its running 500w rms through the sub and 4 x 50 through the door speakers off the head unit. Thats just over £1000 which puts your £1200 into perspective.

If you cant do it yourself or find someone you know phone around.

Last edited by topman2180; 08 September 2011 at 01:13 PM.
Old 09 September 2011, 10:54 PM
  #12  
robhodgson216
Scooby Regular
iTrader: (4)
 
robhodgson216's Avatar
 
Join Date: Jul 2011
Location: carterton
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
Default

£1200

il do it for a fiver and a beer plus if you come back to brize from afgan i live there lol
Old 10 September 2011, 07:43 AM
  #13  
stuward
Scooby Regular
Thread Starter
 
stuward's Avatar
 
Join Date: Jul 2011
Location: warminster
Posts: 100
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by robhodgson216
£1200

il do it for a fiver and a beer plus if you come back to brize from afgan i live there lol
cheers rob but im plymouth based but thanks for the offer lol
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
taylor85
Wanted
2
13 September 2015 04:57 PM
AzzDSM
Engine Management and ECU Remapping
4
13 September 2015 03:59 PM
robbie1988
Wanted
2
13 September 2015 09:25 AM
The Joshua Tree
Computer & Technology Related
18
11 September 2015 09:24 PM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM



Quick Reply: ice expert needed



All times are GMT +1. The time now is 11:10 PM.