gb270
#6
Scooby Regular
Thread Starter
Join Date: Jun 2011
Location: middlesbrough
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
yes they have been orderd was a link on here but they where from america so will be here in a few days. Then I will order some speakers. The fronts are bigger than the back is what I found on here.
#7
Scooby Regular
iTrader: (54)
these the ones u ordered
front
http://cgi.ebay.co.uk/6-Speaker-Adap...d=248895717375
rears
http://cgi.ebay.co.uk/ws/eBayISAPI.d...d=240163718597
front
http://cgi.ebay.co.uk/6-Speaker-Adap...d=248895717375
rears
http://cgi.ebay.co.uk/ws/eBayISAPI.d...d=240163718597
Trending Topics
#8
Scooby Regular
iTrader: (2)
Join Date: Aug 2009
Location: brum
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
door cards are easy.
un-clip the triangle piece by the wing mirrors (inside the car)
undo the screws behind the interior pull handles and the screw were the electric window switches are.
gentley lift up the black surround were the electric window switches are , once clear of the panel, un-plug the switches.
this is the tricky part, u have to pull the interior door pull surround free , but be careful not to snap the plastic (i speak from experience).
once all the black plastic bits have been remove, get ur fingers under the bottom of the panel, on one of the corners and give it a strong pull, it should come lose pretty easy.
once u have the panel away from the door, just lift it upwards so in clears the lip at the bottom of the door glass, and the panel is off.
un-clip the triangle piece by the wing mirrors (inside the car)
undo the screws behind the interior pull handles and the screw were the electric window switches are.
gentley lift up the black surround were the electric window switches are , once clear of the panel, un-plug the switches.
this is the tricky part, u have to pull the interior door pull surround free , but be careful not to snap the plastic (i speak from experience).
once all the black plastic bits have been remove, get ur fingers under the bottom of the panel, on one of the corners and give it a strong pull, it should come lose pretty easy.
once u have the panel away from the door, just lift it upwards so in clears the lip at the bottom of the door glass, and the panel is off.
#11
Scooby Regular
Thread Starter
Join Date: Jun 2011
Location: middlesbrough
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
I did get the adapters from the states and good they are... I have just baught a set od Pioneer TS-E1702I and they are much better now lookin for the back ones and have got the adapters for these tooo...
Thread
Thread Starter
Forum
Replies
Last Post