HAWKEYE ICE CHANGE HELP NEEDED
#1
Scooby Regular
Thread Starter
Join Date: May 2007
Location: Huddersfield/ Wakefield
Posts: 4,702
Likes: 0
Received 0 Likes
on
0 Posts
HAWKEYE ICE CHANGE HELP NEEDED
Tried fitting a new single din cd/dvd today, took the old double din out, and panels etc, put a pocket it but the actual player is too big for the gap of the trim.
Any help is appreciated.
I have read that you can put in a forrester pocket but this wouldnt help the fact that player is too big width wise for trim
Thanks in advance
Any help is appreciated.
I have read that you can put in a forrester pocket but this wouldnt help the fact that player is too big width wise for trim
Thanks in advance
#3
Scooby Regular
Join Date: Nov 2004
Location: Cambridgeshire
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
get a car that comes with a decent sound system then and you wouldnt have these problems!!... or just forget the tunes and open the window for the music
Sorry just being flippint... have a sony single din in mine with a forester pocket great fit no probs apart from the a pants subaru speakers!!
Sorry just being flippint... have a sony single din in mine with a forester pocket great fit no probs apart from the a pants subaru speakers!!
#4
Scooby Regular
Join Date: Nov 2004
Location: The place where indicators don't exist....
Posts: 1,376
Likes: 0
Received 0 Likes
on
0 Posts
#5
Scooby Regular
Thread Starter
Join Date: May 2007
Location: Huddersfield/ Wakefield
Posts: 4,702
Likes: 0
Received 0 Likes
on
0 Posts
The player is a single din dvd etc, the facia doesnt remove.
I removed the original subaru player and attatched a pocket then tried fitting the new player but would firt in the actual surround. The foorrester bit.... im assuming that is just a pocket?
Cant see anyway around than having to cut the trim or buying a more expensive n different player.
Very greatfull for the replies so far.
Thanks
I removed the original subaru player and attatched a pocket then tried fitting the new player but would firt in the actual surround. The foorrester bit.... im assuming that is just a pocket?
Cant see anyway around than having to cut the trim or buying a more expensive n different player.
Very greatfull for the replies so far.
Thanks
#6
Scooby Regular
Join Date: Dec 2006
Location: S.E London
Posts: 13,654
Likes: 0
Received 0 Likes
on
0 Posts
What stereo (make) are you putting in.
My Alpine went in my bugeye no probs, as has the Kenwood in the Hawkeye.
As others have said, most have removable surrounds, but if yours does not, it should be standard single din size with it.
What pocket have you fitted, are you using the original HU brackets to hold the headunit in place, and fit the facia of the dash back around it once in place.
My Alpine went in my bugeye no probs, as has the Kenwood in the Hawkeye.
As others have said, most have removable surrounds, but if yours does not, it should be standard single din size with it.
What pocket have you fitted, are you using the original HU brackets to hold the headunit in place, and fit the facia of the dash back around it once in place.
#7
Scooby Regular
Thread Starter
Join Date: May 2007
Location: Huddersfield/ Wakefield
Posts: 4,702
Likes: 0
Received 0 Likes
on
0 Posts
Its just a cheap think its 'SVC' from motorworld, I attatched a universal pocket, then attatched player, the surround would then not fit around so I tried putting in the player after and it still would not fit.
Trending Topics
#8
Scooby Regular
Join Date: Dec 2006
Location: S.E London
Posts: 13,654
Likes: 0
Received 0 Likes
on
0 Posts
When the dash panel and headunit are out of the car, does the front of the stereo pop thru ?
Got picture of them at all, just seems wierd how a standard single din would not fit.
Possible I guess if its not a removable stereo surround.
Got picture of them at all, just seems wierd how a standard single din would not fit.
Possible I guess if its not a removable stereo surround.
#9
Scooby Regular
Thread Starter
Join Date: May 2007
Location: Huddersfield/ Wakefield
Posts: 4,702
Likes: 0
Received 0 Likes
on
0 Posts
SeViC Wide Screen In-Dash 3.6'' DVD Player - SBL0103MP4 from £149.99 was £199.99 SAVE £50
this is the one.
It is litteraly mm too wide and wont pop through surround
this is the one.
It is litteraly mm too wide and wont pop through surround
#10
Scooby Regular
Join Date: Dec 2006
Location: S.E London
Posts: 13,654
Likes: 0
Received 0 Likes
on
0 Posts
Oh dear, with that front on it, it could be a tough decision... time to chop the surround a little?
Does the opening of the headunit require room also ?
Dont forget its only the operating part of the headunit that needs to poke thru, the rest can sit flush or recessed.
Does the opening of the headunit require room also ?
Dont forget its only the operating part of the headunit that needs to poke thru, the rest can sit flush or recessed.
#11
Scooby Regular
iTrader: (12)
Join Date: Jun 2007
Location: Moved to the Darkside
Posts: 5,034
Likes: 0
Received 0 Likes
on
0 Posts
it should fit its just trial and error with the diff holes in the brackets, it took me a while with one stereo i bought, as someone said above try it a bit further out i had to do this
#12
I had the exact same problem when i was fitting my head unit mate. I had to cut the fascia enough each side so that it fitted. But be careful not to cut too much, just do little bits at a time till it fits. Then you can cover it up with the trim that should come with the head unit.
The one on my car looks fine but only problem is i cant open the bottom compartment cos its so big. I have the JVC EXAD LHX551 head unit.
The one on my car looks fine but only problem is i cant open the bottom compartment cos its so big. I have the JVC EXAD LHX551 head unit.
#13
SeViC Wide Screen In-Dash 3.6'' DVD Player - SBL0103MP4 from £149.99 was £199.99 SAVE £50
this is the one.
It is litteraly mm too wide and wont pop through surround
this is the one.
It is litteraly mm too wide and wont pop through surround
...designed specifically for cars which won't accept the larger faceplates of some 1-DIN DVD players.
#14
Scooby Regular
Thread Starter
Join Date: May 2007
Location: Huddersfield/ Wakefield
Posts: 4,702
Likes: 0
Received 0 Likes
on
0 Posts
Dont really fancy having to chop bits off........ wont fit without tho, luckily i tried fitting before paying and GARYCATS idea could be a option.
Do you have any pics of it fitted?
Thanks to everyone for their responce. A BIG BIG HELP and appreciated
Do you have any pics of it fitted?
Thanks to everyone for their responce. A BIG BIG HELP and appreciated
Thread
Thread Starter
Forum
Replies
Last Post
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM