scoobyDAZZA

my system is as follows
alpine head unit
pair of kenwood components in fronts
2x12" pioneer 2000w subs
kenwood 2x200w amp running fronts
kenwood 1x1600w amp running subs

has been installed now for 3 weeks , all ok,but needs sound deadening lol.

however when driving car earlier ,and not blasting it.the fronts stopped working...subs were but not the comps . .

the amp running them has 2 30amp fuses which are ok . .
checked the fuse nr the battery,also ok.
checked all the wiring,also all ok . .
but,the light on the amp isn't on
and the front left speaker , when turned up really loud is slightly working but very distorted . .
also checked the earths for the amp,ok.

any ides why my fronts aren't working ?
cheers in advance
daz . .

vindaloo

Check the power to the amp again. Switch the power and/or earths with the other amp.

Try hardwiring the Amplifier 'turn on' line to the permanent live temporarily.

Good luck and I hope your amp's OK.

J.

scoobyDAZZA

couldn't switch the wires as theyre all buried underneath the install around the spare wheel thing . . .
i rang m8y who installed it and i checked wot the said but still cant find owt wrong
gonna have 2 ring him again

cheers