problem with my fronts afer install
my system is as follows
alpine head unit pair of kenwood components in fronts 2x12" pioneer 2000w subs kenwood 2x200w amp running fronts kenwood 1x1600w amp running subs has been installed now for 3 weeks , all ok,but needs sound deadening lol. however when driving car earlier ,and not blasting it.the fronts stopped working...subs were but not the comps . . the amp running them has 2 30amp fuses which are ok . . checked the fuse nr the battery,also ok. checked all the wiring,also all ok . . but,the light on the amp isn't on and the front left speaker , when turned up really loud is slightly working but very distorted . . also checked the earths for the amp,ok. any ides why my fronts aren't working ? cheers in advance daz . . |
Check the power to the amp again. Switch the power and/or earths with the other amp.
Try hardwiring the Amplifier 'turn on' line to the permanent live temporarily. Good luck and I hope your amp's OK. J. |
couldn't switch the wires as theyre all buried underneath the install around the spare wheel thing . . .
i rang m8y who installed it and i checked wot the said but still cant find owt wrong gonna have 2 ring him again cheers |
All times are GMT +1. The time now is 01:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands