500

Right... CDF have said they will make some Adjustable cam pulleys if the demand is high enough

These allow you to get the best out of your engine and set the cam timing PROPERLY for the best Torque/BHP and driveability

Standard pulleys have been known to be out of true by as much as 12 degrees. This cost's you power.


now correct me if I'm wrong, but if they are making the outers, then it would make sense for them to be able to make different inners to suit the later cams


Can I see who is interested in purchacing these so we can get some definate figures for costs and make some headway into getting them made

There are only JUN and RCM that make these at the moment, and the costs areen't exacly pocket friendly.

Thanks

Adam


List for Early Centres

500


List for Later Centres

jasonius

iTrader: (1)

I have to hand it to CDF, they certainly are making an effort to improve the amount of scooby stuff out there..

Keep it up..

simbo

im interested in a set for sti 3 heads asap

DuncanG

List for Early Centres
500
simbo
DuncanG


List for Later Centres

WUZ

iTrader: (14)

Interested in a set once they've been tested ( head ruling heart now!)

Russell

ZEN Performance

can I urge you to test them first.

500

Can You test them for us Paul? or can you point us in the right direction?

jim litten

Think Paul might be hinting at maybe getting an engine running on them first and seeing how they fair in a running engine for a period of time rather than a load of guys ending up with long faces "if" they fail, I'm not knocking CDF's work just that I personally would want to see a few sets tested back to back against others before committing to buying any.

drb5

iTrader: (4)

Or CDF could simply give us a full gaurantee with every set purchased. Explaining that if one fails, they pay out for a new engine.

evander

iTrader: (1)

Could be interested in some for a 93 classic, any idea on a rough price?

cdfracing

Hi !

Just seen this post on here! It's only been on here a week!


These pulleys have been a on going thing for a while which we have have been meaning to get cracking with a just haven't had time due to other work and these pulleys do take a long time to make ... plus they would take a while to do the drawings for as I would have to work out making the non-adjustable ones into adjustable ones,

We have adjustable samples for the 02-05 wrx/sti, so these are no problem to make , plus we have made some adjustable pulleys for the ej25..
and of course we have the non-adjustable solid ally pulleys which we have had tested on a few scoobs all with no problems,

We have had our solid ally classic pulleys running on a couple of cars up north for a few years with no problems ,

any questions about these please ask

cdfracing

Before we can make these I would need to get hold of two full sets from somewhere version3&4 then 5&6 .. anyone know the best place to get these from in the Uk ? Ive got 7-9 covered ,

Heres a pic of our Alloy ones









With clear cover fitted

borat52

Would be very interested in a set for sti4 heads, pending final price.
Also love that clear cambelt cover, would love one of them too!

cdfracing

I may have version 3 & 4 covered now !

SUBTYPER

Me please can i have a price for a set for a wrx 93 a ver 4 sti heads 1998 and also ver6 sti ehads 2000

worbs

iTrader: (8)

Have you any idea on price please mate, for a set for version 4 heads.

Iv got some standard cam pully`s from version 1 sti heads if you would need some.

Ian.

cdfracing

Around £350

chris

SUBTYPER

So is that £350 for all versions mate.

cdfracing

Hi ,

Yes when we get underway with them , we are still waiting for sample's and will take time to manufacture ,

This is a very good price , Jun charge £145 per cam and there pulleys are made from steel

SUBTYPER

cool what do you need as I got my engine out o the car and how long would you need the cams for both my version five and 4 engine will they fit kent cams modified cams

cdfracing

Are they adjustable now?

stevebt

iTrader: (8)

how much would it be for the cam pulleys for an sti my03 with AVCS ???

cdfracing

When we work out a final price all pulleys will be the same as they are pretty much the same, all use the same toothform and are pretty much the same length's etc ... all that really change's is the cam trigger sensors,


Chris

gazza19800sti1

when will the clear cam covers be on the market they look brill , thay also show off your pulleys , i maybe after a set for my version four heads , they are a good price

borat52

I'll defo take a set if they are ready by dtsrt of august for sti4 heads.
Will

cdfracing

Good stuff .. we are still getting hold of some sample's , but will post as soon as we know .


If you would like to start a list of interested parties we can get the ball rolling ,


Chris

cdfracing

We now have sample's for 93-97 and 02-05 lightweight adjustable cam pulleys , and will start making these begining of June .

Prices based on 5 set of each

Plain set in 6082T6 uncoated . £350
hard anodised set £370
Hard anodised body / coloured insert and flange £400.


These prices won't be beaten guys ,

Jun in Japan retail these for £149 per pulley ( £596) + delivery + customs and these are made from steel

RCM retail these from £695 .

Remember you are buying direct from the manufacture no middle man. These will also be tested and proven first



Please get your names down.



93-97

1
2
3
4
5

02-05

1
2
3
4
5


Chris

Dill_typeR

What power/torque increases can be expected with adjustable cams over the standard ones?

ZEN Performance

If you can do those , you can do 99-00.

cdfracing

Yes mate we can make them aswell.. but we won't be getting any sample's until the end of June,.


It's hard to say what power increase these will give but it will be a noticeable increase! By having these vernier pulleys you will allow the valves to open right up and timing to be perfect ,


Here's a pic of some we made for some mitsubishi guys, this is what they will look like if they are hard anodised and coloured middle's