Train Horn Group Buy - make sure your heard!
#1
Scooby Regular
Thread Starter
Train Horn Group Buy - make sure your heard!
I'm starting a group buy on the following kit
This is how they sound as fitted to a Scoob belonging to *Nate*
YouTube - Subaru WRX Train Horn
And how they are mounted:-
As for alternative fitment, I'll be mounting mine between the rear bumper hangers and the bumper skin. Also means less cabling to feed through the car.
Theres also the added benefit of having an air compressor on the car for track days etc. (Air and tools)
Dimensions of the horns and compressor are as follows:-
The dimensions of the horns are roughly 15 inches long by 6 inches wide by 6 inches tall.
The compressor is about 8 and a half inches tall by 6 and a half inches wide by 16 inches long.
The kits will be $180 each and once we get (I hope) 10 people we can get a deal done on the shipping costs. I suggest that shipping be to each persons address rather than to one address and then shipped on within the UK (Just adds extra cost IMO)
Even with taxes, I would hope a final price would be around $300 which works out at a little over £150. Seems a lot for a horn but I spent more on my dump valve which is just as useful And these are louder!
So if your interested PM me for any details or questions. If your not interested please don't bugger the thread up with unhelpful comments
So:-
1. EddScott
This is how they sound as fitted to a Scoob belonging to *Nate*
YouTube - Subaru WRX Train Horn
And how they are mounted:-
As for alternative fitment, I'll be mounting mine between the rear bumper hangers and the bumper skin. Also means less cabling to feed through the car.
Theres also the added benefit of having an air compressor on the car for track days etc. (Air and tools)
Dimensions of the horns and compressor are as follows:-
The dimensions of the horns are roughly 15 inches long by 6 inches wide by 6 inches tall.
The compressor is about 8 and a half inches tall by 6 and a half inches wide by 16 inches long.
The kits will be $180 each and once we get (I hope) 10 people we can get a deal done on the shipping costs. I suggest that shipping be to each persons address rather than to one address and then shipped on within the UK (Just adds extra cost IMO)
Even with taxes, I would hope a final price would be around $300 which works out at a little over £150. Seems a lot for a horn but I spent more on my dump valve which is just as useful And these are louder!
So if your interested PM me for any details or questions. If your not interested please don't bugger the thread up with unhelpful comments
So:-
1. EddScott
Last edited by EddScott; 11 November 2006 at 07:12 PM.
#3
Scooby Regular
iTrader: (2)
Please note, that using the 'Anvil' kit, you will only be able to use 2 of the 3 horns supplied, and this was the only place BIG enough to install them !!!
The kit EddScott is GB'ing is the Hammer 3 which is more compact, and a slightly different tone (but still bloody loud !!!! )
The kit EddScott is GB'ing is the Hammer 3 which is more compact, and a slightly different tone (but still bloody loud !!!! )
Trending Topics
#8
Scooby Regular
iTrader: (2)
Join Date: Feb 2003
Location: 2.1 Spec-C .......Pimms O'clock!!
Posts: 2,726
Likes: 0
Received 0 Likes
on
0 Posts
Saw Nate yesterday round my flat, heard these for the first time............FUNKING HELLA!!!!
If you want some LOUD horns then these are most definately the kiddies!! Don't think anyone in their right mind would ever cut you up again!!
Nearly blew my car over
If you want some LOUD horns then these are most definately the kiddies!! Don't think anyone in their right mind would ever cut you up again!!
Nearly blew my car over
#17
Scooby Regular
Join Date: Feb 2005
Location: burton on trent, staffs
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
have sent a pm o eddscott too. ive still not heard anything. been looking on the ebay usa website and they got the kits same as these going,maybe thats where they come from?
#20
Good stuff guys
wish someone had done a GB when i got mine
been running anvil and hammer,have sold the anvil with the 3 ltr compressor though now and just run a hammer in the old backbox space so no-one can see it-just the one is still enough to scare the **** out of people
if you are planning on running more than one horn you will need more air!
150 psi 2.5 gallon med duty viair kit from Matt Savage Land Rover Parts On board Kits
http://i64.photobucket.com/albums/h1...100_0021-1.jpg
http://i64.photobucket.com/albums/h1...c/100_0022.jpg
http://i64.photobucket.com/albums/h1...c/100_0039.jpg
wish someone had done a GB when i got mine
been running anvil and hammer,have sold the anvil with the 3 ltr compressor though now and just run a hammer in the old backbox space so no-one can see it-just the one is still enough to scare the **** out of people
if you are planning on running more than one horn you will need more air!
150 psi 2.5 gallon med duty viair kit from Matt Savage Land Rover Parts On board Kits
http://i64.photobucket.com/albums/h1...100_0021-1.jpg
http://i64.photobucket.com/albums/h1...c/100_0022.jpg
http://i64.photobucket.com/albums/h1...c/100_0039.jpg
Thread
Thread Starter
Forum
Replies
Last Post
Sub-Subaru
General Technical
1
28 September 2015 12:47 PM