Hi there
I am rebuliding my scooby engine
Just want to no is it best I put a 11mm oil pump on and best place to buy one from cheers

 

i dont think there is any real answer to this,my previous engine ran a cosworth high flow oil pump (£200+) and it failed after 41k resulting in big end failure

i now run an 11mm modded oil pump from advanced automotive

http://www.advancedautomotives.com/s...ump-1682-p.asp

 

Seen some on ebay from import cars at 175 wreckon it will be any good

 

yeah import car parts are good also,i was ordering from advanced at the time so made sense to order from there at the same time

 

Sweet
Do all oil pumps fit every scooby

 

i dont know mate to be honest,im guessing yes they are but i honestly dont know

 

27093447759 number on ebay for one from import cars
Can you let me no what you think
But there also this

 

271284982823 ebay number from advanced
Which one best
Only want 280bhp thats all

 

that number doesnt work

what year car have you got and what model?

 

thats only a 10mm version,if your really unsure then speak with alyn @ asperformance for advice

http://www.asptrading.co.uk/acatalog/Contact_Us.html

 

270934477599 that's one from import cars

 

W reg turbo 2000 ej205 engine

 

Wats better then a 11mm or a modified 10mm one

 

Stick with standard pump it will be more than adequate, a modified 10mm is where the pressure relief valve (prv) is shimmed to open at a different point.

 

Hi there

Not sue why you want to have fitted bigger oil pump if you are clearly don't need.

I would go probably only with modified 10mm Oil pump as most,I would speak with Alyn@AS Performance or David@APi

Jura

 

So standard or modified standard
Which one do you wreckon as need to order asap
Can get a standard subaru one 129
Modified one is 155
Honest opinion please

 

Honest opinion is standard will do exactly what you want it to do.

Put the spec of what your doing up here, as said the modified one is exactly the same pump, it's just shimmed for different operating pressures to a given scenario or need.

 

Spoke to.scooby clinic and gone e
with a genuine standard oil pump
cheers peeps for all.the help

 

Hi there

In most cases OE 10mm will be enough,we run on 2.1L modified 10mm Oil pump,on 2.35L we run 11mm Oil pump

Honestly 10mm or Modified 10mm Oil pump is enough in most cases on 2.0L or 2.1L

Jura