HT leads-how to change
28 October 2013, 01:11 PM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2010
Location: Chester
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
HT leads-how to change
Hey,
What's the easiest way to change the leads? As in, which other parts do I need to take off to actually get to where they attach to spark plugs?
I'd prefer to not stick my head under the car!!
It's a standard uk turbo 2000 (99T)
Thank you
Ellie
What's the easiest way to change the leads? As in, which other parts do I need to take off to actually get to where they attach to spark plugs?
I'd prefer to not stick my head under the car!!
It's a standard uk turbo 2000 (99T)
Thank you
Ellie
28 October 2013, 03:15 PM
#4
you dont need to remove anything, HT leads can be removed/refitted in a 99 with everything in place & all can be done from top of engine
just make sure you do it when the car is cold, otherwise you'll get burnt arms & fingers!
remove and replace each lead individually, that way you wont get mixed up when refitting
if changing plugs then you need to do as jaygsi says
just make sure you do it when the car is cold, otherwise you'll get burnt arms & fingers!
remove and replace each lead individually, that way you wont get mixed up when refitting
if changing plugs then you need to do as jaygsi says
Last edited by Gambit; 28 October 2013 at 03:20 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM