Oil pump change
#1
Scooby Senior
Thread Starter
iTrader: (3)
Join Date: Jan 2004
Location: S.Wales
Posts: 4,022
Likes: 0
Received 0 Likes
on
0 Posts
Oil pump change
Guy's,
When I changed my cambelt 4yrs ago on my MY96 V2 STI 555, I also changed the oil pump which I had from Graham Goode ( Modified Oil pump ).
I am changing my cambelt again in August and wondered if I should change the pump again ?
It always has good oil pressure, 6 bar when cold and between 4 & 5.5 bar when hot at about 90'c.
What do you reckon ?
When I changed my cambelt 4yrs ago on my MY96 V2 STI 555, I also changed the oil pump which I had from Graham Goode ( Modified Oil pump ).
I am changing my cambelt again in August and wondered if I should change the pump again ?
It always has good oil pressure, 6 bar when cold and between 4 & 5.5 bar when hot at about 90'c.
What do you reckon ?
#2
Scooby Regular
iTrader: (1)
If you have good oil pressure when cold and warmed up, then I dont see any point in changing it tbh.
When you say it's a modified one from GGR, is it just the pressure relief valve changed for a straight bodied one or was it a larger pump eg 11mm gears?
The modified pump should have had the backing plate screws loctited when they assembled it - the screws coming loose is the most common cause of reduced oil pressure.
Mick
When you say it's a modified one from GGR, is it just the pressure relief valve changed for a straight bodied one or was it a larger pump eg 11mm gears?
The modified pump should have had the backing plate screws loctited when they assembled it - the screws coming loose is the most common cause of reduced oil pressure.
Mick
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM