When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
as above. I'm thinking of popping into rcm to get one of their induction kits for my blobeye, just wondered what everybody else is using and if they have had any problems with them?
and yes I do know it needs mapping after installation along with my new turbo/pump/injectors etc
yeah im thinking that aswell,looks good matey.do you run a cold air feed and have you had any running issues as i know some maf's dont like induction kits?
yeah im thinking that aswell,looks good matey.do you run a cold air feed and have you had any running issues as i know some maf's dont like induction kits?
shreksta my kit was fitted by matt olleys brother himself at RCM i asked him the same question and both him and his brother said to me i have nothing to worry about there is enough air reaching the air filter and that was 4 years ago now with no running issues on my car what so evergo for it its a nice bit of kit that works.SJ.
Last edited by stonejedi; 27 April 2013 at 05:43 PM.
shreksta my kit was fitted by matt olleys brother himself at RCM i asked him the same question and both him and his brother said to me i have nothing to worry about there is enough air reaching the air filter and that was 4 years ago now with no running issues on my car what so evergo for it its a nice bit of kit that works.SJ.
so you dont run any sort of ducting towards it then? do you get a bit of turbo noise like a dump valve through it (but not as chavvy as a dump valve)
forget those inner wing one's i know people do it but from every tuner i have ever spoken to about it told me not to waste my time with inner wing kits,i think the main problem is size (to small)and road contamination.SJ.
forget those inner wing one's i know people do it but from every tuner i have ever spoken to about it told me not to waste my time with inner wing kits,i think the main problem is size (to small)and road contamination.SJ.
yeah i would be worried about all the **** going on it
so you dont run any sort of ducting towards it then? do you get a bit of turbo noise like a dump valve through it (but not as chavvy as a dump valve)
ha ha,no i dont run any sort of ducting and as i said before i have never experienced any kind of running problems not even on hot days.About the sound you get abit of waste gate chatter that is nice but when your really pressing the gas pedal its a induction ROAR that cant be beat.SJ.
Last edited by stonejedi; 27 April 2013 at 05:52 PM.
ha ha,no i dont run any sort of ducting and as i said before i have never experienced any kind of running problems not even on hot days.About the sound you get abit of waste gate chatter that is nice but when your really pressing the gas pedal its a induction ROAR that cant be beat.SJ.
not sure i will hear it over my full de-cat/de-resonated exhaust tho
cheers buddy i think i will go with the rcm one,i notice on their site they offer a large cone for them-is that what you have?
not sure i will hear it over my full de-cat/de-resonated exhaust tho
cheers buddy i think i will go with the rcm one,i notice on their site they offer a large cone for them-is that what you have?
mine is the regular size K&N that they supply with there kit which is big enough,the really big and long K&N air filters is the one's that people usually use with the rotated turbo kit's.SJ.
K&N is a really good quality air filter i have been using them for years.there not heavily coated with oil and there filtration is up there with the best.If RCM use them you got to know there good.SJ.
K&N is a really good quality air filter i have been using them for years.there not heavily coated with oil and there filtration is up there with the best.If RCM use them you got to know there good.SJ.
yeah definatly,i shall pop down in the week and get one
As above we are not run too cold air feed and we are made 490bhp on 20% methanol,not sure if Cold air feed will release more power,but on our spec heads has been limiting factor
As I said before when I bought my car it had a Japspeed inner wing kit fitted which was pretty much mince meat when I checked it, rusty, damp, possibly my arches were not sealed very well but not the best place for an air intake in my experience.. Got one under the bonnet now with a cold air feed and seems to work pretty well.. RCM seem to be the one to go for!!
i m running kn typhoon thats wing feed, i ve had no troubles so far, but im gonna take a look at it next time i have some spare time on my hands to see what condition its in, all i know is it gives a lovely induction noise and u can hear the turbs through it. Although i am very weary of going through puddles
i m running kn typhoon thats wing feed, i ve had no troubles so far, but im gonna take a look at it next time i have some spare time on my hands to see what condition its in, all i know is it gives a lovely induction noise and u can hear the turbs through it. Although i am very weary of going through puddles
dont like the idea of a wing mounted one mate if im honest,you got some pics?
27 April 2013, 09:03 AM
newage owners-show me your induction kits please
go for it its a nice bit of kit that works.SJ.
.SJ.
