Injectors sent for flow testing, strange results?
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Apr 2007
Location: NE England
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
Injectors sent for flow testing, strange results?
I sent one of each of these for testing yesterday:
The one on the left is a standard 440cc yellow, from a Legacy GTB,
The one on the right is supposed to be a Lateral 555cc, which I got new/used without any paperwork:
http://lateralperformance.co.uk/prod..._v5_6___99__00
They were ultrasonically cleaned, and tested at 3 bar, held open.
Both produced an almost identical 540cc result.
Not what I was expecting at all !
The spray patterns were quite different though apparently.
I'll get them back on monday and get some more ifo off the guy who tested them.
The one on the left is a standard 440cc yellow, from a Legacy GTB,
The one on the right is supposed to be a Lateral 555cc, which I got new/used without any paperwork:
http://lateralperformance.co.uk/prod..._v5_6___99__00
They were ultrasonically cleaned, and tested at 3 bar, held open.
Both produced an almost identical 540cc result.
Not what I was expecting at all !
The spray patterns were quite different though apparently.
I'll get them back on monday and get some more ifo off the guy who tested them.
Last edited by Qwertyco; 16 February 2013 at 11:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
hedgecutter
General Technical
3
25 September 2015 02:35 PM