rossbrown316

Hi i have just bought some 550 injectors for a bargin and was wondering what do i need to do regarding getting mapped. Do i fit them then take to garage to get a map. Or fit them at the garage? If i fit them before will it cause damage or problems?

Thanks

sunnyjones003

iTrader: (12)

If you can fit them your self then great and take it easy on the way up. Thats what i did and it was fine mate. Oh and your saving ur self labour charges

Jimbob

iTrader: (13)

Fit yourself, and DO NOT GO ON BOOST whilst on the way to get it mapped.

The Pink Ninja

iTrader: (23)

i got my mapper to fit my last set

Midlife......

iTrader: (2)

What other mods do you have that are maxing out the WRX jobbies?

Shaun

rob84

iTrader: (5)

Shaun, do you still have that sti manifold & tgv deletes ?

Midlife......

iTrader: (2)

It's in the garage Rob

No TGV's as it's STi and has been ported.

Shaun

jura11

iTrader: (7)

Hi there

Personally I wouldn't fit injectors without the mapping,but that's me

And agree with Shaun about the what other upgrades you are planning put on yours, injectors alone will not give you more power etc

Jura

rob84

iTrader: (5)

My sti has those tgv's so I'm looking for deletes for my new build.
would you be interested in selling the whole lot ?

Midlife......

iTrader: (2)

The car is coming into Palmers very soon to sort out the bodywork following on from the clown who reversed into it, I'll stick it in the boot so you can have a look

Long story, but from me accepting 100 quid to sort it (she refused) it's now gone the solicitor and claim route for £1000's of pounds.

The Claim Company / Solicitors / Hire car / personal injury / vehicle engineers / say that you use Thompson's Bodyshop.....

Are they OK?

Shaun

rossbrown316

I have also got full exhaust system decat, Front mount intercooler, decat up pipe, induction kit and then the injectors.

Thanks for you advice aswell guys.

Midlife......

iTrader: (2)

Are you changing the turbo?

Shaun

rossbrown316

I wasnt planning to replace the turbo but thinking of it now it might be worth replacing. How much bhp would i be looking at with all this in place?

rob84

iTrader: (5)

Thompsons are superb mate. They are an approved body shop for subaru/Isuzu

jura11

iTrader: (7)

Hi there

Really injectors you don't need at this level without the putting bigger turbo.With those parts fitted without the injectors you should be looking at 270-280bhp(although 300bhp is too possible)

As I said before putting bigger injectors doesn't mean you will be making more power,yours current 440cc injectors should be OK for 320bhp


Hope this help

Jura

Midlife......

iTrader: (2)

TBH adding all that to a TD04 turbo is a bit counter productive IMHO. The TD04's great strength is it's early spool up which makes up for a lack of top end. Personally I'd buy a VF35 or cheap as chips front entry TD05 and get some bang for your buck

Shaun

rossbrown316

Im tempted now to get a td05 would i be looking at about 330 bhp or bit more with that on. Can i buy after remap or will it need mapping after new turbo is on?

jura11

iTrader: (7)

Hi there

if you are looking at TD05,I assume you are looking at 16G(which you can find on older STi),if yes you will need convert this turbo to front entry

If you will fit turbo after remap,you will need again remap,due this I would fit eevrything in one go

Speak to Neil@Slowboy racing,he is located just outside of the Brands Hatch,he will able to fit all those bits and can carry remap too


Jura

Midlife......

iTrader: (2)

I ran a newage WRX with a TD05 plus a few mods including porting the OEM headers to 330 ish BHP and on reflection what a nice drive it was. Eibach springs and a Godspeed front brake kit.

Mapped by Bob Rawle so it wouldn't break the gearbox I could tool about without fear of anything breaking or thinking that the damn car was trying to kill me The 5 speed box suits the ratio's especially 3rd gear

The VF35 is virtualy the same.

I now run a few more BHP with a few more mods but hark back to my TD05 days

Shaun