Nick_Scooby

Do you know of anyone who has one of these resonator delete pipes?

I'm keeping the standard air box with Do Luck Filter and thought it would help replacing this part with a straight pipe as in the image shown?

Scoobysmeet

They come up on ebay from time to time but beware, some are straight and some are angled.

Ghostbly

angled you can't use the stock air box

WhiteWagonMan

iTrader: (34)

Make one yourself or get one made mate,there isnt much too it and wouldnt imagine it will be hard to replicate.

Nick_Scooby

Thanks for your replies, would the LINK below work or not because it's slightly angled?


http://www.japperformanceparts.co.uk...p?ID=100873951

Nick_Scooby

Sorry this is the correct link:
http://www.japperformanceparts.co.uk...p?ID=100873951

Will this work with a standard air box?

slash920

does this really make a diffference then??

Nick_Scooby

Thought removing a restriction can't hurt?

Nick_Scooby

Will this definately not fit?




The pipe that fits over the top is reasonably flexible isn't it?

gc8-r

iTrader: (21)

Depends on the style of your pipe and box..!!
Had one of these on my type r and was a good bit of kit..
If you have the same pipe as bottom one shown in pics above the ribbed one it will work..
If it's a old version its a no no...Like top engine pic..
Zero sport stuff is spot on and very good quility

Nick_Scooby

Thanks gc8-r, mine is as top image so you think it would fit with a bit of adjusting? I'm running standard box and pipes with Do Luck Filter, just wanted to remove this resonator as per top image, just need that replacement pipe, thought this would work :-(

gc8-r

iTrader: (21)

No it not going to fit mate...sorry
If you do a search on Web for alloy tubing you can find a piece like that one in engine pic
http://www.autosiliconehoses.com/sil...ight-tube.html

Try some place likethis and ask for a reducing pipe... Measured both ends and tell them they can make anything up

Nick_Scooby

Cheers mate will give this a try!

Nick_Scooby

Would it work if I replaced the flexi pipe I have (top image) with the flexi pipe bottom image or would it be too long?

gc8-r

iTrader: (21)

Take a pic of your engine bay....
And I'll see what I can find..