Kosta

On my MY99 UK Turbo when cornering hard left, I am getting an awful grinding/vibration through the steering wheel.

I've had the OSF wheel bearing changed, but this has made no difference.

Anyone experienced this before? I'm going to the Nurburgring in 4 weeks so need it sorting pretty sharpish.

Help!

Thanks

Turbotits

iTrader: (2)

Possibly the other bearing. I had similar replaced both bearings and problem cured

scoobyman.matt

does it do it at a standstill or just on the roll?

Trice54

I am having exactly this problem on my 05 Sti. I fitted a downpipe and removed the steering UJ to do so. After putting it all back together I get a bad metal type grind when turning left, and left only. Putting it into Subaru tomorrow. Will let you know if they sort it.

lord shaun 83

would be good to find the problem to this, i am experiencing something like this also. normally when pulling out of a junction again turning left with a little more power on than normal. if i find the problem i will be sure to post up.
mine is my99 turbo.
almost feels like its happening at the back of the steering wheel!

willN

iTrader: (1)

I have this exact problem on my 03 only when turning left giving it some

Trice54

Subaru found the problem. It's the heat shield on the up pipe. It's come loose, and when turning left it grinds on the UJ.

willN

iTrader: (1)

you my sir are a legend.. ill go rip the ****** off now!

Sy5

iTrader: (6)

Did this cure the problem? I'm having the same after fitting bellmouth Decat.