Scooby-Sean

Hi all im new to owning a scoob and turbo's but im planning to take my Fmic out and refit a good tmic i dont want a standard one im really wanting one off a sti but i dont know what one will fit my car is a Uk 1995 2000 turbo with a cusco strutbrace (dont know if it makes it tighter space) Also what other pipes/things will i need to do the swap cheers

The reason being i want to go back to tmic is i bought it with the fmic and i want my lower lip spoiler on and fogs fitted again so im looking to change it back again but as iv never really worked on a scoob i didnt know what ones will fit and what other pipes i will need cheers for any info given thanks Sean

midnight

iTrader: (10)

You can fit a std 93/95 slanty intercooler onto your car with the correct pipework,but these are the worst of all the subaru tmic for keeping intake temps down.You can fit a facelift tmic which are slightly bigger but you may have to trim the body of your throttle body to enable it to clear the bulk head.I am not to sure if you can fit a V7 sti unit as i think there may not be enough clearence,but do a search using the search barand there should be a few threads detailling how to do this.

Scooby-Sean

Yeah iv found a few threads i keep seeing v3 v4 v5/6 so on but im unsure on there years aswell as im new to scoobs iv seen a few v5/6 i think on ebay but i dont want to make loads of work for myself as i dont want to ruin anything if you inderstand so i want the most straight forward one or one someone has had on a classic thanks

midnight

iTrader: (10)

In that case go for a V4 sti unit, you will have to trim a few cm's off your throttle body and rework your mounts , but it will fit . A V5 has the recirc valve bolted to it so it will get in the way of your idle air control valve.

Scooby-Sean

Ok ill have a look around see what i can find cheers for the info mate

53

iTrader: (41)

Try and find an ARC slanty one mines working well

Scooby-Sean

Looks nice that mate havent see one of them about yet but i have time to locate one did you need anyother pipes or brackets or anything & was it a pretty much direct fit cheers

thunder8

iTrader: (1)

i hace a version 5 my99 and fitted a newage wrx intercooler,fits lovely and is def bigger.

just had to use the boost pipe underneath and bend the long L shape bracket

hope this helps