magicmat

Hi guys,

I dont normally venture into the world of scooby's but Im having a some real problems and i wanted to appeal to your community to see if you can help me out

I bought what i thought were Nismo 555cc injectors for my Nissan 200sx however when i got them, they didnt fit the standard S14 injector loom, the spray pattern is different to nismos as is the injector number

I've had a little bit of a google and im starting to wonder if they are scoobie injectors, im starting to have no god damn clue. but alot of people are pointing me in this direction, so thought i'd come over and say hello.. and HELP

I think i will have them flow tested and cleaned, BUT i still need to find out what they are ... ????

So the numbers on the injectors are:

(the number for Nismo's are A46Z00, so similar)

A46-00
3825
5
0020

On the black bit it says, "made in japan"

looking at each injector I see

"made in japan A1"
"made in japan A3"
"made in japan A3"
"made in japan A6"


Here are some pictures:























so anyone got any ideas???

Davey96wrx

iTrader: (1)

They look like ph2 injectors from a '99 impreza and
as std are 440cc's unless they've been modified.

AshMurc

the 440s on my impreza are yellow... but i am going purely on colour, i suspect they are not the only yellow injectors in the world!!

maybe drop these guys a line http://injectortune.co.uk/ they serviced mine, see all types and going by their face book page are genuinely interested in their work!

ilogikal1

That.

440s from a phase 2.

magicmat

Hi guys,

thanks for the messages, really apprciate it.

440cc isn't anywhere near the 550cc they are suppose to be. A flow check would confirm but it hasnt looked good.

Many thanks for all the help !

Matt

yabbadoo4

iTrader: (8)

prob be reflowed 440,s bud. need to be confirmed obviously but if they are you will get some cash back for them.

magicmat

Yeah think your right, flowing with a print out is going to be the only way to confirm.

could you tell me what ££ they go for? Standard and reworked?

Cheers

yabbadoo4

iTrader: (8)

standard 440,s anything between 40-50 quid reflowed 550,s might be 130-150? im sure more experienced sellers will be along with a better price guide. i paid 40 quid for standard 440,s for mine.

magicmat

Thanks for the figures, not really near what i paid for 'Nismo 555's'

I'll see what i can sort, but really im owed a refund.

yabbadoo4

iTrader: (8)

also im sure i seen a pic of nismo 550,s and they were red?

yabbadoo4

iTrader: (8)

just fyi they are also yellow like 440,s but the pintle caps are different. u might be in luck as in the pics of your ones the pintle caps look different to my subaru 440,s.

magicmat

they are just odd aint they?

I cant figure them out. 555 nismo's are yellow, 740s are red (i think)

Only way to know is to flow test them, but until i know what they are, i cant really advise what plugs are needed to run them

yabbadoo4

iTrader: (8)

the pintle cap def looks different? hope u havent been mugged off m8.

Jimbob

iTrader: (13)

I thought 440cc were the only yellow injectors too, but there was a thread up a week or more ago with a guy selling 555cc yellows, and someone put this link up.

http://lateralperformance.co.uk/prod..._v5_6___99__00

They look similar to yours.

yabbadoo4

iTrader: (8)

yeah they look very similar dont they? still gives you a problem tho as they are still subaru 550,s if it is them and not the ones you were after. unless of course nissan and subaru use the same ones?

Jimbob

iTrader: (13)

A lot of the japanese cars shared the same parts, so I`d imagine that they will work. But cleaning and flow checking would be a good start, atleast you`ll know what impedance they are and also what flow they are.

71/200

iTrader: (2)

They do look like Phase 2 440cc, normally the modded ones ie reflowed have a plastic pintle cap to atomise the fuel.

I know nothing about Nissans however i sold a mate some Impreza phase 2 440cc for his S13 and they fitted no bother.

P1Drifter

iTrader: (7)

not sure if it will help but i had yellow nismo 555's and had to bend the electrical connector pins to get the wiring plug to fit, might be something else to check

LegacySTi

iTrader: (13)

they are 440,s from phase 2 99/00