pulleys ?
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Apr 2009
Posts: 701
Likes: 0
From: WRX STI JDM BUGEYE 340BHP
pulleys ?
hey guys getting some light weight pulleys how hard is it to replace a set of pulleys ive got a 2002 jdm sti thinking of doing it myself cheers 
Which ones?
The simpler ones are the crankshaft, power steering and alternator. Even those can be a complete PITA, since they are mega tight
Some folk also fit camshaft, waterpump and oil pump pulleys, they have some value to tuners, but can't be seen.
The simpler ones are the crankshaft, power steering and alternator. Even those can be a complete PITA, since they are mega tight
Some folk also fit camshaft, waterpump and oil pump pulleys, they have some value to tuners, but can't be seen.
Camshaft pulleys maybe..... especially if you are running aftermarket cams and need vernier pulleys to get the best out of them.
The water pump pulley - nope and the oil pump does not even have a pulley. The crank is the driver - straight onto the pump gear!!
The water pump pulley - nope and the oil pump does not even have a pulley. The crank is the driver - straight onto the pump gear!!
Got mine from Harvey Smith, Darren fitted 'em for me when the car went to be mapped.
I changed them because my crankshaft pulley had deteriorated, the rubber shock absorbing part had gone, allowing the pulley halves to wander and cause tapping noises.
I changed them because my crankshaft pulley had deteriorated, the rubber shock absorbing part had gone, allowing the pulley halves to wander and cause tapping noises.
Thread
Thread Starter
Forum
Replies
Last Post