4evascoob

Hi all, thinking of fitting a RCM induction kit to my scoob but was wondering how neccessary it was to have it mapped in ?

Car already has a few mod and is running approx 345ish, it has also been mapped once by B rawle,

cheers guys..

stew.

trevsjwood

iTrader: (2)

needs mapping at the same time as fitting else its likely it will run roughly until it is mapped.
Trev

TINO.wrx

iTrader: (5)

up to you, some people have had a CAIK fitted without a re-map and not had any problems. but im sure as usual with scoobynet someone will be along to tell you that you car will go bang!!lol ;-)

RetroMk1

iTrader: (1)

As standard they run rich so it would be ok to run without a map. But if its already been mapped then i would suggest getting it tweaked as you dont wanna run it too lean

trevsjwood

iTrader: (2)

Mine suffered from an extremely lumpy idle/cutting out and the journey to the mapper was difficult enough. As for running it on boost, I wouldn't even go there.
Trev

Scooby Arthur

iTrader: (2)

When mine was mapped after fitting CAIK it was running very lean, I would get a re-map personally.

4evascoob

Probably get it mapped just to be on the safe side !!

TH3_5T1G

iTrader: (15)

+1

Good advice there Trev

How's your car running these days?

rickya

iTrader: (18)

Yes you will need to tweek the map to get the Maf rescaled at least.

4evascoob

Going to see the guys at slowboy-racing for a detailed plan on what to do, want to do a bit more but car has done 105,000 now !!

trevsjwood

iTrader: (2)

Hi Tom,
cars good, was rebuilt by Paul Finch last year after a ringland failure. Unfortunately I blew the clutch at the pod on Saturday, literally half the material missing on the front side. All fixed now and ready to go. I am slowly learning what not to do.
nice to hear from you mate
Trev