Ive just had my engine rebuilt and only done 300 miles before the clutch bearing pulled of the clutch.. i took the engine out and changed the clutch, its all back togrther but it wont start.. it missfires and sounds like it wants to start but wont. anyone got any idear? ive tripple checked all the wires.. do you need to reset anyting?

 

are the fuel pipes the right way round ??

 

Or injectors connected up the wrong way round??

 

i didnt disconnect the injectors.. pipes are good. its was running fine the day before! do i need to reset the ecu or anything? it keeps popping and missfires when trying to start it?

 

sounds , fuel related , how old is they car ??

 

Try switching plugs on coilpacks bud you might have plugged them on wrong ones

 

my97 type r. didnt unplug the plugs.. ive tryed the spark on all the leads. two of them didnt spark to well.. but the plugs and leads are 2weeks old!

 

If two didnt spark well that will be your problem mate, run your engine then knock it off and take the spark plugs out on the poor spark ones, make sure that its burning fuel and not wet

 

Dodgey connection to spark amp on drivers chassis leg?

 

still not starting.. any more idears anyone??