When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a my95 impreza with baileys dumpvalve on it and have decided to remove it.am i right in saying that if i remove it and blank both ends of the pipe were the dump valve was connected it will be ok to run car like it,or shall i just remove the bung from 1 pipe and join it to the other pipe were the dump valve was fitted.or just as above blank the other end were dump valve was fitted and leave the bung in the other hole.
I have a my95 impreza with baileys dumpvalve on it and have decided to remove it.am i right in saying that if i remove it and blank both ends of the pipe were the dump valve was connected it will be ok to run car like it,or shall i just remove the bung from 1 pipe and join it to the other pipe were the dump valve was fitted.or just as above blank the other end were dump valve was fitted and leave the bung in the other hole.
As long as you still have the OE TD turbo fitted, then yes.
Just remove the Bailey and bung the hole that it left. Then bung the small vac hose, or even better re-plumb the pipe work.
was gonna remove the bung from the pipe and join the 2 pipes together with a joiner.
No mate.
You either need to blank them both, or fit a DV of some sort. You need some thing there to stop the pressure venting or you will have **** all boost.
18 May 2011, 04:43 PM
BLANKING OF DUMP VALVE HELP
