anyone used this before?
07 March 2011, 04:25 PM
#9
To be correct, No. It has Subaru Select Monitor.
The link works for me
http://www.alcyone.org.uk/ssm/usbhowto.pdf
The link works for me
http://www.alcyone.org.uk/ssm/usbhowto.pdf
07 March 2011, 04:27 PM
#10
Scooby Regular
iTrader: (8)
Join Date: Dec 2004
Location: Hereford
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
sod making that cable....
is this the right software as its listed for OBD2?
http://www.evoscan.com/evoscan-gps-o...oscan-software
is this the right software as its listed for OBD2?
http://www.evoscan.com/evoscan-gps-o...oscan-software
07 March 2011, 04:30 PM
#11
Its on the second link as a OBD-I, and has the same functions. So if you wanted to, could it be converted to an OBD-II socket?
Apologies if thats what you have done, but I still can't get the PDF link working for me, so can't confirm if thats what you mean. I'm on works US servers, maybe its that, will try it later.
Apologies if thats what you have done, but I still can't get the PDF link working for me, so can't confirm if thats what you mean. I'm on works US servers, maybe its that, will try it later.
07 March 2011, 04:50 PM
#12
It is a piece of pi$$ and cost about a tenna.
See here,
S/w is compatible on SSMI/SSMII/OBDII and Canbus.
You just require the correct cable.
I do have a SSMI to OBD converter, but these are not compatible as SSM and OBD use different language to communicate. I have been through this with some very knowledgeable people, and the SSM cable and SSMI or Evoscan software are the only compatible combination for the pre MY98.
See here,
S/w is compatible on SSMI/SSMII/OBDII and Canbus.
You just require the correct cable.
Its on the second link as a OBD-I, and has the same functions. So if you wanted to, could it be converted to an OBD-II socket?
Apologies if thats what you have done, but I still can't get the PDF link working for me, so can't confirm if thats what you mean. I'm on works US servers, maybe its that, will try it later.
Apologies if thats what you have done, but I still can't get the PDF link working for me, so can't confirm if thats what you mean. I'm on works US servers, maybe its that, will try it later.
07 March 2011, 06:36 PM
#13
It is a piece of pi$$ and cost about a tenna.
See here,
S/w is compatible on SSMI/SSMII/OBDII and Canbus.
You just require the correct cable.
I do have a SSMI to OBD converter, but these are not compatible as SSM and OBD use different language to communicate. I have been through this with some very knowledgeable people, and the SSM cable and SSMI or Evoscan software are the only compatible combination for the pre MY98.
See here,
S/w is compatible on SSMI/SSMII/OBDII and Canbus.
You just require the correct cable.
I do have a SSMI to OBD converter, but these are not compatible as SSM and OBD use different language to communicate. I have been through this with some very knowledgeable people, and the SSM cable and SSMI or Evoscan software are the only compatible combination for the pre MY98.
where did you get your cable from though as the only cable i have found are the best part of £20.00
07 March 2011, 10:03 PM
#15
15 March 2011, 01:26 AM
#17
hi, the cable i made works very well..just bought that evoscan software and yes iam in to the ecu and works well...but when i put the 2 x black plugs together i only get fault 24 and 33...when i check the dtc on the software i get all sorts of codes then i clear the codes check again and get a load of diff ones and it does not get rid of the cel..i know iam new to this software but if anyone can help with setting me up that would be great....also i have changed the iacv and had new clocks/cable and gear box adaptor but the faults are still there????? thanks
29 March 2011, 12:28 AM
#19
hi can i use EcuExplorer with my my95 impreza? also my other question is can i use my TTL232R cable with the legacy radio plug on the end of it that i use with evoscan, can i use this with romraider. thanks.
Last edited by sti345; 01 April 2011 at 10:27 AM.