braided fuel lines
#1
Scooby Regular
Thread Starter
iTrader: (24)
Join Date: Oct 2009
Location: Aberdeen
Posts: 2,604
Likes: 0
Received 0 Likes
on
0 Posts
braided fuel lines
hey folks i have an 03 sti >400 bhp
i would like to braid the fuel lines including new fuel filter
has anyone done this and have instructions and an itemised listing of various pipes and connections
cheers
steve
i would like to braid the fuel lines including new fuel filter
has anyone done this and have instructions and an itemised listing of various pipes and connections
cheers
steve
#2
Scooby Regular
iTrader: (14)
Join Date: Sep 2010
Location: North Yorkshire
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Did mine not so long back
http://www.p1woc.co.uk/forums/showpo...&postcount=294
If someone can confirm that the pipe ID's are the same for newage and classic (I'm 99% certain they are but would be worth checking) I will send you details of where I got my hose and fitting from if it would help.
James
http://www.p1woc.co.uk/forums/showpo...&postcount=294
If someone can confirm that the pipe ID's are the same for newage and classic (I'm 99% certain they are but would be worth checking) I will send you details of where I got my hose and fitting from if it would help.
James
#5
Scooby Regular
iTrader: (14)
Join Date: Sep 2010
Location: North Yorkshire
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
AN -6 hose with 15mm hose finishers
Make sure you get some rubber lined hose and not the teflon lined stuff - you won't cut it neatly and it won't go over the spigots on the fuel filter. I went into my local Pirtek and bought some of their SS Fuel Hose (8mm I think which is AN-6 equivalent). The hose finishers I got from http://cgi.ebay.co.uk/6-AN6-15mm-Blu...item230a81b65d they do them in a few different colours too. The 12.5mm ones are for the teflon lined hose (thinner walled than the rubber lined so smaller OD) and won't fit.
Also got a couple of hose seperators from the same place to finish things off.
James
Make sure you get some rubber lined hose and not the teflon lined stuff - you won't cut it neatly and it won't go over the spigots on the fuel filter. I went into my local Pirtek and bought some of their SS Fuel Hose (8mm I think which is AN-6 equivalent). The hose finishers I got from http://cgi.ebay.co.uk/6-AN6-15mm-Blu...item230a81b65d they do them in a few different colours too. The 12.5mm ones are for the teflon lined hose (thinner walled than the rubber lined so smaller OD) and won't fit.
Also got a couple of hose seperators from the same place to finish things off.
James
#7
Scooby Regular
iTrader: (3)
Join Date: Jan 2003
Location: Oss, The Netherlands
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
Torques Ebay store has fittings and hoses.
Cheap (but not so cheap the quality suffers) fast delivery and a nice guy to deal with.
http://stores.ebay.co.uk/Torques-U-K
Cheap (but not so cheap the quality suffers) fast delivery and a nice guy to deal with.
http://stores.ebay.co.uk/Torques-U-K
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post