Code reader / Data logger
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Dec 2009
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Code reader / Data logger
Would this work on a newage impreza or is there something similar/better out there.
Launch CReader V
http://cgi.ebay.co.uk/Launch-CReader-V-OBD2-EOBD-CAN-BUS-Code-Scanner-Reader-/150535439539?pt=UK_Diagnostic_Tools_Equipment&hash =item230c9c84b3
Launch CReader V
http://cgi.ebay.co.uk/Launch-CReader-V-OBD2-EOBD-CAN-BUS-Code-Scanner-Reader-/150535439539?pt=UK_Diagnostic_Tools_Equipment&hash =item230c9c84b3
#2
Scooby Regular
Join Date: Dec 2007
Location: southampton
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
I have one of these m8,works well and good service from seller too.
http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWNX:IT
http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWNX:IT
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Dec 2009
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Markietay. What functions are available for the Impreza using this?
I have one of these m8,works well and good service from seller too.
http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWNX:IT
http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWNX:IT
#5
Scooby Regular
Join Date: Dec 2007
Location: southampton
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Check out the link,it shows some of the functions.
The software you get is proscan and allows you to datalog and read and clear fault codes.The lead does not work with ecu explorer you need an open source lead like the tactrix one for that.
The software you get is proscan and allows you to datalog and read and clear fault codes.The lead does not work with ecu explorer you need an open source lead like the tactrix one for that.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM