birchy2010

iTrader: (12)

Thinking of ordering a FMIC but talking you need an aftermarket dump valve.
is this the right one? http://cgi.ebay.co.uk/Bailey-DV12-Du...item35aa5fc741

Bailey DV12?

Thanks

f4la k

iTrader: (1)

Fitted an hdi gt2 front mount and kept my standard bov. Dont need to go stickin a chav whistle on because your fitting a fmic

birchy2010

iTrader: (12)

was told i could do that if i can find an adpater plate? i had a look and could only find this
http://cgi.ebay.co.uk/SUBARU-IMPREZA...item1e604a0943
which i dont think is right :S

f4la k

iTrader: (1)

I bought my fmic from Harvey smith on here, decent guy and know his stuff about these coolers. They come with a length of pipe to fit the standard valve..

Billet

iTrader: (60)

the dump valve in the pic is for a newage. if you want to keep the standard dump valve and you have a newage then harvey sells the adapters for iirc £25

initialD

iTrader: (2)

that design of valve is for a top mount cooler .

Billet

iTrader: (60)

https://www.scoobynet.com/trader-ann...cessories.html

found it

birchy2010

iTrader: (12)

thanks for all your help with this guys, i've sent harvey a PM, i hae posted in his thread as well.

mine is a newage STI amd the FMIC is from japspeed as part of the group buy.

TimH

iTrader: (11)

If you're after a second hand item, I have an APS twin port high volume DV (recircs up to a certain pressure, then dumps to atmosphere) and also a Forge recicrulating dumpvalve, both used successfully with my APS FMIC, but I'm now running with no DV.

Let me know if you're interested