Problem air lock (Im hoping)
#1
Problem air lock (Im hoping)
Hi all I just changed the header tank cap and have noticed that the bottom hose is now cold and had a little coolant seeping out of the side and the top hose was hot and pretty solid and hard to squeeze.
Over the weekend I checked the hoses on sunday and they were both warm both of them you could squeeze when the car was running.
Do you I have an airlock and can just putting a new cap cause this?
Sorry for the long thread
Thanks
Over the weekend I checked the hoses on sunday and they were both warm both of them you could squeeze when the car was running.
Do you I have an airlock and can just putting a new cap cause this?
Sorry for the long thread
Thanks
#5
Scooby Regular
iTrader: (60)
Join Date: Apr 2010
Location: West Mids
Posts: 2,567
Likes: 0
Received 0 Likes
on
0 Posts
then its 98% that the thermostat is ok. if there is an air lock then start the car from cold with the header tank cap off and wait till the air bubbles have come out, by doing this your are eliminating another possibility
Trending Topics
#10
Had exactly the same problem on a car ( not subaru ) and the water pump had failed resulting in no flow through the rad to cool down the water ,top hose was boiling bottom cold because it can't circulate. worth checking?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM