best mapping place?
The two mentioned can travel to YOU too.
There's also Bob Rawle, Pat Herbron, Andrew Carr, Andy Forrest, etc, etc.... The world's your oyster. Where are you located?
There's also Bob Rawle, Pat Herbron, Andrew Carr, Andy Forrest, etc, etc.... The world's your oyster. Where are you located?
Last edited by joz8968; Nov 14, 2010 at 03:57 PM.
Scooby Regular
iTrader: (12)
Joined: Jun 2007
Posts: 3,734
Likes: 0
From: 700+ WR1 aka The Vuvu Zela...10.6 @ 136 weighing 1370kg....say no more....
In addition to these there is also Paul Blamire at Zen Performance, Martyn Jeffery and Dave Rowe.
Last edited by JP4; Nov 14, 2010 at 08:44 PM. Reason: correction
Trending Topics
Scooby Regular
Joined: Aug 2004
Posts: 2,086
Likes: 0
From: Nottingham
Its actually depends on who can be nearest now as all the above names are good. I have used Richard Bulmar and Bob Rawle. I have seen Dave Rowes name but not heard of anyone on here using him? Where is he based?
Scooby Regular
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Considering we've been building and mapping some of the quickest cars around for some considerable time, I think it's about time Martyn was mentioned along with the above!
Yes, Alan you're totally right.
My bad, I simply reeled off the first names that immediately entered head. That's why I added "etc., etc." But really sorry I didn't mention yet another mapping guru anyway.
My bad, I simply reeled off the first names that immediately entered head. That's why I added "etc., etc." But really sorry I didn't mention yet another mapping guru anyway.
Martyn get's my vote. Got no experience of anybody else but always get 1st class treatment along with great customer service.
Joined: Apr 2005
Posts: 11,778
Likes: 4
From: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
hi kev
personally i cant rate bob rawle highly enough,tried to get the very best and still a safe map out of a good friends v1 with simtec ecu
bob got much more from the car than previous mapper(who i wont name on this forum as its rude )
during the map there was minor issues with a coil pack at high boost he still allowed time to swap them on the day to avoid having to abandon it,
Bob is based in swindon and will travel if required to you,
personally i cant rate bob rawle highly enough,tried to get the very best and still a safe map out of a good friends v1 with simtec ecu
bob got much more from the car than previous mapper(who i wont name on this forum as its rude )
during the map there was minor issues with a coil pack at high boost he still allowed time to swap them on the day to avoid having to abandon it,
Bob is based in swindon and will travel if required to you,
ok right thats great was not expecting that sort of quick response off that many people this site rocks........ ive got a v3 wrx sti import and ive heard you cant mapp the ecu so what the next best option and who off. ive got a blizz boost controller, full decat, pipa cross fillter and a uprated fuel pump. help would be appreciated
Joined: Apr 2005
Posts: 11,778
Likes: 4
From: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Scooby Regular
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Dave has strong links to Roger Clark Motorsport.
On another note, unlike some mappers who are frankly geeky, he's a proper bloke, the kind we have a lot of time for.
The wee man needs an aftermarket ECU, Apexi, Simtek, Syvecs etc.
Any of the above are perfectly capable.
On another note, unlike some mappers who are frankly geeky, he's a proper bloke, the kind we have a lot of time for.
The wee man needs an aftermarket ECU, Apexi, Simtek, Syvecs etc.
Any of the above are perfectly capable.
Joined: Apr 2005
Posts: 11,778
Likes: 4
From: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Scooby Regular
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
But where would all us sad Scooby fans be without said 'geeks', eh? 
...
...By the side of the road nursing a broken car, that's what.
So, all hail the mapping geeks!
......By the side of the road nursing a broken car, that's what.
So, all hail the mapping geeks!
Last edited by joz8968; Nov 14, 2010 at 10:51 PM.
Scooby Regular
iTrader: (12)
Joined: Jun 2007
Posts: 3,734
Likes: 0
From: 700+ WR1 aka The Vuvu Zela...10.6 @ 136 weighing 1370kg....say no more....
Scooby Regular
iTrader: (3)
Joined: Aug 2000
Posts: 25,565
Likes: 2
From: 1600cc's of twin scroll fun :)
Bob Rawle
Richard Bulmer
Pat Herborn
Paul@zen
Richard AKA Fiestaboy
Simon AKA jollygreenmonster
Dynamix
Andy F
Steve Simpson
Dave Rowe
Martyn Jeffery
Andy Carr
Probably a few more on there too
Tony
Richard Bulmer
Pat Herborn
Paul@zen
Richard AKA Fiestaboy
Simon AKA jollygreenmonster
Dynamix
Andy F
Steve Simpson
Dave Rowe
Martyn Jeffery
Andy Carr
Probably a few more on there too
Tony
Former Sponsor
iTrader: (4)
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
ok right thats great was not expecting that sort of quick response off that many people this site rocks........ ive got a v3 wrx sti import and ive heard you cant mapp the ecu so what the next best option and who off. ive got a blizz boost controller, full decat, pipa cross fillter and a uprated fuel pump. help would be appreciated
ESL have been developing a board for the v3/4 and when I spoke to Andy there this week that were mapping the demo car on one but still not sure of release date.
Simon
