Notices

strange noise

Thread Tools
 
Search this Thread
 
Old 12 July 2010, 01:05 PM
  #1  
5c0008y
Scooby Newbie
Thread Starter
 
5c0008y's Avatar
 
Join Date: Jul 2010
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default strange noise

hi all, I've got a classic face lift impreza 2000 reg non turbo, sometimes after i been driving and its just idle , there is a strange noise that sounds like a pulley on its way out. its not loud but you can hear it, but the other day i thought id put my foot on the clutch and pow noise went, so i tested this again going all the way up to the top of the clutch, noise goes when pushed , comes back when lifted, so i then put my foot on the clutch but didn't push it just slightly touched it and i mean very slight touch and the noise went so what on earth could this be ? note when clutch is being pushed all way down sometimes it squeaks I've greased it to get rid of that. but any help much appreciated cheers.
Old 12 July 2010, 02:38 PM
  #2  
prodriverules
Scooby Regular
iTrader: (52)
 
prodriverules's Avatar
 
Join Date: Jun 2010
Location: C+K MOTORS
Posts: 11,769
Likes: 0
Received 1 Like on 1 Post
Default

clutch release bearing or spigot bearing in the flywheel mate
Old 12 July 2010, 03:06 PM
  #3  
5c0008y
Scooby Newbie
Thread Starter
 
5c0008y's Avatar
 
Join Date: Jul 2010
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

but if you jus touch the pedal , no pressure applied it stops , how can that affect the inside of a clutch , when the cable not even moving ?? cheers
Old 12 July 2010, 04:12 PM
  #4  
prodriverules
Scooby Regular
iTrader: (52)
 
prodriverules's Avatar
 
Join Date: Jun 2010
Location: C+K MOTORS
Posts: 11,769
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by 5c0008y
but if you jus touch the pedal , no pressure applied it stops , how can that affect the inside of a clutch , when the cable not even moving ?? cheers
when just lightly pressing the clutch you start to load the release bearing thus taking up the slack onit and stopping the noise,when they wear they get distorted and run out of alliginment when not loaded ie clutch up,but once pressed they run inline and stop making the noise,there similar to the bearing in pulleys which is why you state it sounds like a pulley on its way out,hope this helps mate
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Phil3822
ScoobyNet General
33
02 October 2015 03:22 AM
Jamesh10
General Technical
3
01 October 2015 11:56 PM
legb4rsk
Non Scooby Related
14
01 October 2015 05:18 AM
sivo
ScoobyNet General
12
26 September 2015 12:34 PM
Baskey
General Technical
3
25 September 2015 03:45 PM



Quick Reply: strange noise



All times are GMT +1. The time now is 07:10 PM.