Forester XT. Question about turbo.
#1
Scooby Newbie
Thread Starter
Join Date: Jul 2010
Location: HULL
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Forester XT. Question about turbo.
Hi guys and gals.
This is my first post so any advice would be appreciated.
My 54 plate Forester XT 2.0L needs a new turbo. Does anyone know what size / manufacturer and model would be fitted to this car? Its not an import. The only numbers I can see on the turbo casing / manifold appear to be 35-1391 0?? and 5008.
Second question is could I fit a more powerfull turbo without having to upgrade injection system etc?
Any help would be appreciated.
Cheers
This is my first post so any advice would be appreciated.
My 54 plate Forester XT 2.0L needs a new turbo. Does anyone know what size / manufacturer and model would be fitted to this car? Its not an import. The only numbers I can see on the turbo casing / manifold appear to be 35-1391 0?? and 5008.
Second question is could I fit a more powerfull turbo without having to upgrade injection system etc?
Any help would be appreciated.
Cheers
#2
Scooby Newbie
Thread Starter
Join Date: Jul 2010
Location: HULL
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Think I've sussed the turbo, its a TD04L-13T-6.
What else could I do with regards to an upgrade, or any little tweaks to give the car a bit more umphff?
Much appreciated.
Cheers
What else could I do with regards to an upgrade, or any little tweaks to give the car a bit more umphff?
Much appreciated.
Cheers
#3
Scooby Regular
Join Date: Jun 2010
Location: North East England
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
#4
Scooby Newbie
Thread Starter
Join Date: Jul 2010
Location: HULL
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply.
Seems I am between a rock and a hard place here.
According to all the info I can source, it might be a Mitsubushi or an IHI model, a TD04 or a TD035. I can't get the heat shield off the turbo to check without stripping away the air intake and manifold. Subaru can't tell me which was fitted . The car is sat on my drive waiting to go to garage. Can any one tell me where on the turbo casing I can get the manufacturers info? Knowing this will help me decide where to get the turbo changed (depending which is fitted will determin how much and how long I have to wait to get the car back).
HELLLLLP
Seems I am between a rock and a hard place here.
According to all the info I can source, it might be a Mitsubushi or an IHI model, a TD04 or a TD035. I can't get the heat shield off the turbo to check without stripping away the air intake and manifold. Subaru can't tell me which was fitted . The car is sat on my drive waiting to go to garage. Can any one tell me where on the turbo casing I can get the manufacturers info? Knowing this will help me decide where to get the turbo changed (depending which is fitted will determin how much and how long I have to wait to get the car back).
HELLLLLP
Last edited by anothertench; 07 July 2010 at 09:46 AM. Reason: Spelling mistake!!! LOL
#5
Scooby Regular
iTrader: (2)
A UK model will have a TD035. JDM models had the TD04L.
Can't remember which injectors are on the UK model but a turbo swap to something cheap like an Impreza TD04 may well need an injector swap - alternatively bump up the fuel pressure.
Oh - and a remap will also be needed.
Can't remember which injectors are on the UK model but a turbo swap to something cheap like an Impreza TD04 may well need an injector swap - alternatively bump up the fuel pressure.
Oh - and a remap will also be needed.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM
jobegold@hotmail.co.uk
ScoobyNet General
2
27 September 2015 09:44 PM