CLASSIC'S TRIM PANEL REMOVAL/REFITTING...???
Can that bit of curved black plastic trim that sits between the rear edge of the rear window and the C-pillar, on a 4-door Classic, be easily removed and replaced with a fresher part?:-

...Or is it really a respray job in satin black that'd be required?
...Or is it really a respray job in satin black that'd be required?
Last edited by joz8968; Jun 16, 2010 at 01:22 PM.
Ha. No mate - the paint (or whatever finish it is?) has half flaked away, leaving at least 50% silver underneath!
So I defo either need to spray it, or preferably replace it with a nicer panel... if possible, that is.
Anyone know if/how that panel comes off (if at all)?
So I defo either need to spray it, or preferably replace it with a nicer panel... if possible, that is.
Anyone know if/how that panel comes off (if at all)?
Last edited by joz8968; Jun 16, 2010 at 01:21 PM.
If it's a panel, it'll come off. Have a look all round it, is there anything covering part of it? If so, there may be clips under.
If not, try lifting it with a scredriver, but put cloth under the bit against any paintwork
If not, try lifting it with a scredriver, but put cloth under the bit against any paintwork
joz the whole trim comes off in one piece from a to c post, you would be better seeking one from a breaker which i did, if you do need to remove it, you need to pull the rubber seals down were the windows would sit when they are closed to expsoe the retaining screws and the behind the wider faded black part there are 2-3 white barbed panel clips retain it.
Joined: Apr 2005
Posts: 11,778
Likes: 4
From: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
I know some one who skinned them in CF, so they definitely come off.


Mark's on here somewhere, will see if I can find a link to his profile.
Mark's on here somewhere, will see if I can find a link to his profile.
Last edited by mickywrx; Jun 16, 2010 at 07:45 PM.
Trending Topics
yeah comes of with all the other trim, and to add to my earlier post, you may be able to remove by drilling out rivets, the rear section of trim if yo wished to paint it or wrap in carbon.
Cheers peeps.
Micky, will you be so kind to tell me where your mate got them wrapped? Or if he did it himself, where he got hold of the CF effect vinyl? Ta mate... Again!!!
Micky, will you be so kind to tell me where your mate got them wrapped? Or if he did it himself, where he got hold of the CF effect vinyl? Ta mate... Again!!!
Joined: Apr 2005
Posts: 11,778
Likes: 4
From: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
John, it's not vinyl it's carbon fibre, and he did it himself. 
Link to his profile. Not sure how often Mark uses SN, but send him a PM if it's something you're interested in.
Oh, and iTrader feedback, nudge, nudge.

Link to his profile. Not sure how often Mark uses SN, but send him a PM if it's something you're interested in.
Oh, and iTrader feedback, nudge, nudge.
Last edited by mickywrx; Jun 16, 2010 at 08:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM









can these be bought new either from icp or else where?
