CLASSIC'S TRIM PANEL REMOVAL/REFITTING...???
1 Attachment(s)
Can that bit of curved black plastic trim that sits between the rear edge of the rear window and the C-pillar, on a 4-door Classic, be easily removed and replaced with a fresher part?:-
Attachment 54079 ...Or is it really a respray job in satin black that'd be required? |
Tried Autoglym bumper care on it first?
|
Ha. No mate - the paint (or whatever finish it is?) has half flaked away, leaving at least 50% silver underneath!
So I defo either need to spray it, or preferably replace it with a nicer panel... if possible, that is. Anyone know if/how that panel comes off (if at all)? |
If it's a panel, it'll come off. Have a look all round it, is there anything covering part of it? If so, there may be clips under.
If not, try lifting it with a scredriver, but put cloth under the bit against any paintwork;) |
joz the whole trim comes off in one piece from a to c post, you would be better seeking one from a breaker which i did, if you do need to remove it, you need to pull the rubber seals down were the windows would sit when they are closed to expsoe the retaining screws and the behind the wider faded black part there are 2-3 white barbed panel clips retain it.
|
Right, so that bit ON IT'S OWN won't come off - it'll lift with it all the other black trim surround, as well? :confused:
|
2 Attachment(s)
I know some one who skinned them in CF, so they definitely come off.
Attachment 54080 Attachment 54081 Mark's on here somewhere, will see if I can find a link to his profile. |
Well that's another option of course - carbon fibre effect vinyl covering! I think I'll look into that... ;)
|
Originally Posted by joz8968
(Post 9451075)
Right, so that bit ON IT'S OWN won't come off - it'll lift with it all the other black trim surround, as well? :confused:
|
Cheers peeps.
Micky, will you be so kind to tell me where your mate got them wrapped? Or if he did it himself, where he got hold of the CF effect vinyl? Ta mate... Again!!! ;) |
John, it's not vinyl it's carbon fibre, and he did it himself. ;)
Link to his profile. Not sure how often Mark uses SN, but send him a PM if it's something you're interested in. Oh, and iTrader feedback, nudge, nudge. ;) |
Oh right, a piece of proper carbon fibre in the same pattern. Cool
|
Originally Posted by mickywrx
(Post 9451174)
Oh, and iTrader feedback, nudge, nudge. ;)
Now fully rectified with a glowing TS... :D :thumb: :) |
Reply to old post from the archive :lol1: can these be bought new either from icp or else where?
|
|
All times are GMT +1. The time now is 03:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands