Have I done the right thing???
12 May 2010, 07:30 PM
#1
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Apr 2009
Location: Devon
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
Have I done the right thing???
The solid hose under my slanty cooler split on the turbo end so I decided to replace it with a silicone one :
http://cgi.ebay.co.uk/IMPREZA-WRX-GC...item4cebd3aa0c
I sawed through the existing hose on the Intercooler end,filed the edge smooth and slipped this hose over and jubilee cliped it up reall tight with about an inch and a half overlap.
Other end onto the turbo and Dumpvalve into the required place.
Can anyone forsee any probs with this??
I have to say the car is shedloads more reponsive after doing this.
I get rather worried when things go well these days!!
http://cgi.ebay.co.uk/IMPREZA-WRX-GC...item4cebd3aa0c
I sawed through the existing hose on the Intercooler end,filed the edge smooth and slipped this hose over and jubilee cliped it up reall tight with about an inch and a half overlap.
Other end onto the turbo and Dumpvalve into the required place.
Can anyone forsee any probs with this??
I have to say the car is shedloads more reponsive after doing this.
I get rather worried when things go well these days!!
Thread
Thread Starter
Forum
Replies
Last Post
Phil3822
General Technical
0
30 September 2015 06:29 PM