barneys34

just wondering what type of cable i need to run delta dash or similar on my 99 scooby its running ecutek software i would like to be able to connect my netbook to it to monitor boost presure ,intake temps and so on is this even possible

p.rite.sh

interesting, would be interested to know...what software would you use?

Splitpin

I believe EcuTeK supply their own ISO-USB cable when you purchase DD. However if you want something compatible, the KKL interface for sale here will do fine, either with DeltaDash, ECU Explorer, EvoScan and so on.

JDM_Stig

iTrader: (3)

use a vag lead to monitor live data if ur year car allow it.

barneys34

were would i get a vag lead and would it work with the obd port on my 1999 scooby what software would be best for my car.ithought vag was for vws and audi am i missing something

scoobyboothy

iTrader: (1)

just bought one online, it was on offer aswell

barneys34

can anyone confirm this vag usb cable will work on my 1999 subaru ipreza turbo with delta dash or similar

Splitpin

If you mean a vag.com lead, then yes, it should. However if you want to be certain of something that'll work without any d*cking around, I've already pointed you in the right direction above. £19.53 delivered and you can't really go wrong.

Butty

iTrader: (2)

Forget about a generic cable for delta dash - it also needs a licence dongle with it or an Ecutek cable with dongle within it. This comes as part of the (very) full price IRO £225!!
Use an open source logger program and the cable you've spotted.

barneys34

i did not realise deltadash needed a lisence whats the best free software to use with the vag cable on my subaru ipreza 1999

71/200

iTrader: (2)

x2 iirc the drivers are in the Dongle part of the lead, i use my notebook to use DD but have the licensed product.

I think you can use the OS stuff to datalog not so sure on a MY99 as they cant be mapped on os yet?

Butty

iTrader: (2)

Not sure what the best OS program is, but I've used Romraider which was fine.

scoobyboothy

iTrader: (1)

would i be able to using the vag cable and ecu explorer, see if my car has had a remap at all. Or would i need the ecutek software'

scoobyboothy

iTrader: (1)

bump

scoobyboothy

iTrader: (1)

anybody?

71/200

iTrader: (2)

The only way you can tell if your ECU has been mapped is with the Tuner software from Ecutek as the MY99 cant be mapped with OS. So to check if an Ecutek licence is present you will need the relevant software. The DD package is not capable of doing this.

You could always take your car to an Ecutek dealer and ask them to check, they can tell you the date and who mapped it if its been done.

There is a way of mapping the MY99 without Ecutek as somebody in this post has done it however i doubt he will share

scoobyboothy

iTrader: (1)

cheers mate

Splitpin

That's not quite correct. Boothy, you can use ECUExplorer to check whether the ECU is running a standard firmware image or not. However it isn't as simple as clicking your mouse a couple of times and watching the software come back with a dialog box that says "Yes your ECU is standard" or "No it isn't", you have to do your homework a bit to determine whether what the software is showing you is consistent with a standard ECU or not.

However, it can be done, and if you already have an interface and the software, and have already lifted the cover in the passenger footwell and know what part number is on your ECU can, it will take only a couple of minutes. If you want to know how, pm me.