this must be the only thing i havn't looked into.

i have a uk95 classic, i wanted to fit one of the power stearing pumps from a facelift, already have it anyways

but:

1) my car dont have a cooler like the facelift
2) the conections for the newer one look differnt.

will the hoses for the old one just bolt, & weill there be any issue with the cooler part?

this should be the last thing i need to know before rebiulding the engine
thanks in advance

 

here you go, https://www.scoobynet.com/technical-...g-upgrade.html

 

perfect, so its very strait forward then

thanks for the link mate.

 

hi there i have a 1995 classic import and my steering has been very notchy fo the past 2 weeks, and today it has become very heavy, i checked the ps tank and is holding the fluid.. could this be the common problem leak ur lalking about in the link

thanks

 

the main problem was always them leaking. i solved mine by changing the tub, from a legacy. they have 2 seals. where as the imprezas have a very small seal

 

Sorry but what do u mean by the tub??? and do they fit straight on with no mods!!

 

no worry mate i never chance to do this to my classic, the only problem i had was the leaking from the pump, when i rebuild my classic it will have this conversion done.

 

sorry, its what i call tub. the tank, that holds the power stearing fluid.
the legacy one is slightly bigger, but has 2 seals.

 

my pump after changing the tank is perfect, but instead of the tank being small, its larger with 4 bolts to the top.

i'll just sell the unit once changed.
i know lots of the older pumps fail