what need for rebuild.
08 January 2010, 10:22 AM
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: huddersfield
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
what need for rebuild.
hi just wondering if anybody can tell me what else i will need for rebuilding engine from where bottom end went at start of december. Ive already got a new bottom end which is a v5 type r one and the heads currently on car seem ok just bottom end that damaged. I know i will need gaskets but will i need a full gasket kit or just individual gaskets? Is there anything else that i need?
Cheers andy
Cheers andy
08 January 2010, 10:53 AM
#2
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
You need to remove ALL the swarf from your heads before building, also replace the modine oil cooler. Don't forget the oil feeds to the turbo.
HTH
dunx
HTH
dunx
08 January 2010, 05:31 PM
#4
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Wus !
GET THEM SCOOBIES FIXED YER SLACKER...
LOL
dunx
P.S. You'd be amazed how many people re-use a swarf filled turbo/oil cooler/cylinder head on a re-build. Then wonder why it failed again....
GET THEM SCOOBIES FIXED YER SLACKER...
LOL
dunx
P.S. You'd be amazed how many people re-use a swarf filled turbo/oil cooler/cylinder head on a re-build. Then wonder why it failed again....
Thread
Thread Starter
Forum
Replies
Last Post